How to easy recalculate carry over points:
<?php
class DateIntervalEnhanced extends DateInterval {
public function recalculate()
{
$from = new DateTime;
$to = clone $from;
$to = $to->add($this);
$diff = $from->diff($to);
foreach ($diff as $k => $v) $this->$k = $v;
return $this;
}
}
$di = new DateIntervalEnhanced('PT3600S');
echo "Instead of " . $di->format('%h:%i:%s') . " it outputs " . $di->recalculate()->format('%h:%i:%s');
# output will be: "Instead of 0:0:3600 it outputs 1:0:0"
PHP - Manual: DateInterval::format
2024-04-18
DateInterval::format
(PHP 5 >= 5.3.0, PHP 7, PHP 8)
DateInterval::format — Formats the interval
说明
public DateInterval::format(string
$format): stringFormats the interval.
参数
-
format -
The following characters are recognized in the formatparameter string. Each format character must be prefixed by a percent sign (%).formatcharacterDescription Example values %Literal %%YYears, numeric, at least 2 digits with leading 0 01,03yYears, numeric 1,3MMonths, numeric, at least 2 digits with leading 0 01,03,12mMonths, numeric 1,3,12DDays, numeric, at least 2 digits with leading 0 01,03,31dDays, numeric 1,3,31aTotal number of days as a result of a DateTime::diff() or (unknown)otherwise4,18,8123HHours, numeric, at least 2 digits with leading 0 01,03,23hHours, numeric 1,3,23IMinutes, numeric, at least 2 digits with leading 0 01,03,59iMinutes, numeric 1,3,59SSeconds, numeric, at least 2 digits with leading 0 01,03,57sSeconds, numeric 1,3,57FMicroseconds, numeric, at least 6 digits with leading 0 007701,052738,428291fMicroseconds, numeric 7701,52738,428291RSign " -" when negative, "+" when positive-,+rSign " -" when negative, empty when positive-,
返回值
Returns the formatted interval.
更新日志
| 版本 | 说明 |
|---|---|
| 7.1.0 | The F and f format
characters were added. |
范例
示例 #1 DateInterval example
<?php
$interval = new DateInterval('P2Y4DT6H8M');
echo $interval->format('%d days');
?>
以上例程会输出：
4 days
示例 #2 DateInterval and carry over points
<?php
$interval = new DateInterval('P32D');
echo $interval->format('%d days');
?>
以上例程会输出：
32 days
示例 #3 DateInterval and DateTime::diff() with the %a and %d modifiers
<?php
$january = new DateTime('2010-01-01');
$february = new DateTime('2010-02-01');
$interval = $february->diff($january);
// %a will output the total number of days.
echo $interval->format('%a total days')."\n";
// While %d will only output the number of days not already covered by the
// month.
echo $interval->format('%m month, %d days');
?>
以上例程会输出：
31 total days 1 month, 0 days
注释
注意:
The DateInterval::format() method does not recalculate carry over points in time strings nor in date segments. This is expected because it is not possible to overflow values like
"32 days"which could be interpreted as anything from"1 month and 4 days"to"1 month and 1 day".
add a note
User Contributed Notes 12 notes
glavic at gmail dot com ¶
8 years ago
baptiste dot place at utopiaweb dot fr ¶
12 years ago
With php 5.3, DateTime is sweet !
Here is one quick example :
<?php
/**
* A sweet interval formatting, will use the two biggest interval parts.
* On small intervals, you get minutes and seconds.
* On big intervals, you get months and days.
* Only the two biggest parts are used.
*
* @param DateTime $start
* @param DateTime|null $end
* @return string
*/
public function formatDateDiff($start, $end=null) {
if(!($start instanceof DateTime)) {
$start = new DateTime($start);
}
if($end === null) {
$end = new DateTime();
}
if(!($end instanceof DateTime)) {
$end = new DateTime($start);
}
$interval = $end->diff($start);
$doPlural = function($nb,$str){return $nb>1?$str.'s':$str;}; // adds plurals
$format = array();
if($interval->y !== 0) {
$format[] = "%y ".$doPlural($interval->y, "year");
}
if($interval->m !== 0) {
$format[] = "%m ".$doPlural($interval->m, "month");
}
if($interval->d !== 0) {
$format[] = "%d ".$doPlural($interval->d, "day");
}
if($interval->h !== 0) {
$format[] = "%h ".$doPlural($interval->h, "hour");
}
if($interval->i !== 0) {
$format[] = "%i ".$doPlural($interval->i, "minute");
}
if($interval->s !== 0) {
if(!count($format)) {
return "less than a minute ago";
} else {
$format[] = "%s ".$doPlural($interval->s, "second");
}
}
// We use the two biggest parts
if(count($format) > 1) {
$format = array_shift($format)." and ".array_shift($format);
} else {
$format = array_pop($format);
}
// Prepend 'since ' or whatever you like
return $interval->format($format);
}
?>
me at unreal4u dot com ¶
6 years ago
If you want the difference between two timestamps in HOURS, do not forget to add the number of days:
<?php
// Bad example
$lastEntryDate = new \DateTime('2015-05-23 00:10:20', new \DateTimeZone('UTC'));
$dateDifference = $lastEntryDate->diff(new \DateTime('2015-05-25 02:35:45', new \DateTimeZone('UTC')));
var_dump((int)$dateDifference->format('%H'));
// Returns 2
if ((int)$dateDifference->format('%H') > 24) {
// Will never enter here, (int)$dateDifference->format('%H') will contain 0-23 ONLY
}
?>
Instead, sum the days:
<?php
// Bad example
$lastEntryDate = new \DateTime('2015-05-23 00:10:20', new \DateTimeZone('UTC'));
$dateDifference = $lastEntryDate->diff(new \DateTime('2015-05-25 02:35:45', new \DateTimeZone('UTC')));
var_dump(($dateDifference->days * 24 + (int)$dateDifference->format('%H')));
// Returns 50
if (($dateDifference->days * 24 + (int)$dateDifference->format('%H')) > 24) {
// Will enter here now :)
}
?>
Hope this saves somebody some time and possible bugs :)
balaclark at gmail dot com ¶
11 years ago
Be aware that your default timezone can sometimes alter the result of a diff so that the returned months/days are incorrect.
There is a bug report at: http://bugs.php.net/bug.php?id=52480
thflori at gmail dot com ¶
4 years ago
The fact that $dateTime->diff(new DateTime()) returns a DateInterval and the interval is something where you don't get any useful number is somebit annoying.
<?php
$longTimeAgo = new DateTime('1999-10-23 16:29:21')
// easy workaround:
var_dump((float)$longTimeAgo->format('U.u') - (float)(new DateTime())->format('U.u'));
// or in seconds if you are not that precise
var_dump($longTimeAgo->getTimestamp() - (new DateTime())-getTimestamp());
// this function can help you if you want to stick with DateInterval objects
function interval_to_float(DateInterval $interval) {
$seconds = 0;
$days = (int)$interval->days;
if ($days === false || $days === -99999) { //php5.5 compatibility
$days = floor($interval->y * 365.2525);
$days += $interval->m * 30; // that's totally inaccurate
// or: $days += floor($interval->m * 30.4167);
$days += $interval->d;
}
return ($days * 24 * 60 * 60 +
$interval->h * 60 * 60 +
$interval->i * 60 +
$interval->s) * ($interval->invert ? -1 : 1) +
$interval->f / 1000000; // you may wonder but they are negativ and not affected by invert
}
pankajs7590 at gmail dot com ¶
5 years ago
public function getTotalInterval($interval, $type){
switch($type){
case 'years':
return $interval->format('%Y');
break;
case 'months':
$years = $interval->format('%Y');
$months = 0;
if($years){
$months += $years*12;
}
$months += $interval->format('%m');
return $months;
break;
case 'days':
return $interval->format('%a');
break;
case 'hours':
$days = $interval->format('%a');
$hours = 0;
if($days){
$hours += 24 * $days;
}
$hours += $interval->format('%H');
return $hours;
break;
case 'minutes':
$days = $interval->format('%a');
$minutes = 0;
if($days){
$minutes += 24 * 60 * $days;
}
$hours = $interval->format('%H');
if($hours){
$minutes += 60 * $hours;
}
$minutes += $interval->format('%i');
return $minutes;
break;
case 'seconds':
$days = $interval->format('%a');
$seconds = 0;
if($days){
$seconds += 24 * 60 * 60 * $days;
}
$hours = $interval->format('%H');
if($hours){
$seconds += 60 * 60 * $hours;
}
$minutes = $interval->format('%i');
if($minutes){
$seconds += 60 * $minutes;
}
$seconds += $interval->format('%s');
return $seconds;
break;
case 'milliseconds':
$days = $interval->format('%a');
$seconds = 0;
if($days){
$seconds += 24 * 60 * 60 * $days;
}
$hours = $interval->format('%H');
if($hours){
$seconds += 60 * 60 * $hours;
}
$minutes = $interval->format('%i');
if($minutes){
$seconds += 60 * $minutes;
}
$seconds += $interval->format('%s');
$milliseconds = $seconds * 1000;
return $milliseconds;
break;
default:
return NULL;
}
}
kulakov74 at yandex dot ru ¶
8 years ago
glavic, this does not eliminate the problem of "32 days", if you use your class for normalizing intervals of days, because the result will depend on the current month which is used for DateTime by default. And if that does not matter (because the interval is not that long) you don't have to call diff() to get the same recalculation:
$DT=new DateTime('0000-01-01'); $DT->add($oInt); echo($DT->format('Y-m-d H:i:s'));
kuzb ¶
11 years ago
Quick class to allow you to input a time in any unit, and have it recalculate in to different denominations (for example, seconds to hours, minutes and seconds):
<?php
class DateIntervalEnhanced extends DateInterval
{
/* Keep in mind that a year is seen in this class as 365 days, and a month is seen as 30 days.
It is not possible to calculate how many days are in a given year or month without a point of
reference in time.*/
public function to_seconds()
{
return ($this->y * 365 * 24 * 60 * 60) +
($this->m * 30 * 24 * 60 * 60) +
($this->d * 24 * 60 * 60) +
($this->h * 60 * 60) +
($this->i * 60) +
$this->s;
}
public function recalculate()
{
$seconds = $this->to_seconds();
$this->y = floor($seconds/60/60/24/365);
$seconds -= $this->y * 31536000;
$this->m = floor($seconds/60/60/24/30);
$seconds -= $this->m * 2592000;
$this->d = floor($seconds/60/60/24);
$seconds -= $this->d * 86400;
$this->h = floor($seconds/60/60);
$seconds -= $this->h * 3600;
$this->i = floor($seconds/60);
$seconds -= $this->i * 60;
$this->s = $seconds;
}
}
// Example usage
$di = new DateIntervalEnhanced('PT3600S');
$di->recalculate();
// outputs 1:0:0 instead of 0:0:3600 now!
echo $di->format('%H:%i:%s');
?>
nabikaz at gmail dot com ¶
3 months ago
Important: Note that from PHP version <= 7.2.11 if you use %F or %f the result may be a negative number, which is a bug mentioned here:
https://bugs.php.net/bug.php?id=77007
And has been fixed since version 7.2.12.
pekka at gmx dot de ¶
11 years ago
Note that `%a` is broken on Windows on VC6 builds. http://bugs.php.net/bug.php?id=51184
zell1285 at gmail dot com ¶
6 years ago
I was doing this: $endDate->diff($startDate)->format('%a’)
to get the number of the days between the end date and the start date. This is correct, but if I subtract 2016-04-23 00:00:00 to 2016-04-02 09:39:01 (note that in only one of the datetime values we have the time) the result is 21 (and not 20 as I expected). This is because the result of the diff is 20 days AND 14 hours, 20 mins and 59 secs. If you use the %a to get the days from a dateinterval, it will round the days (and if the hours are greater than 12, it will round days up).
So, DO NOT USE the %a formatting to get the difference in days between 2 datetime unless you are 100% sure that both the Datetime objects don't have the time.
You can solve easily with $valueDate->diff($startDate)->days that will return only the days in a dateinterval (without the fuc***g rounding).
beowolve at gmail dot com ¶
8 years ago
German Version of formatDateDiff:
function formatDateDiff($start, $end=null) {
if(!($start instanceof DateTime)) {
$start = new DateTime($start);
}
if($end === null) {
$end = new DateTime();
}
if(!($end instanceof DateTime)) {
$end = new DateTime($start);
}
$interval = $end->diff($start);
$doPlural = function($nb,$str){
if ($nb > 1) {
switch ($str) {
case 'Jahr':
case 'Monat':
case 'Tag':
return $str.'e';
case 'Stunde':
case 'Minute':
case 'Sekunde':
return $str.'n';
}
} else
return $str;
}; // adds plurals
$format = array();
if($interval->y !== 0) {
$format[] = "%y ".$doPlural($interval->y, "Jahr");
}
if($interval->m !== 0) {
$format[] = "%m ".$doPlural($interval->m, "Monat");
}
if($interval->d !== 0) {
$format[] = "%d ".$doPlural($interval->d, "Tag");
}
if($interval->h !== 0) {
$format[] = "%h ".$doPlural($interval->h, "Stunde");
}
if($interval->i !== 0) {
$format[] = "%i ".$doPlural($interval->i, "Minute");
}
if($interval->s !== 0) {
$format[] = "%s ".$doPlural($interval->s, "Sekunde");
}
if(count($format)==0 || (count($format)==1 && $interval->s !== 0)) {
return "weniger als eine Minute";
}
// We use the two biggest parts
if(count($format) > 1) {
$format = array_shift($format).", ".array_shift($format);
} else {
$format = array_pop($format);
}
// Prepend 'since ' or whatever you like
return $interval->format($format);
}
IT
PHP
编程语言
Linux
科技
开发编程
Elasticsearch
HTML/CSS/XML
网络
JAVA
NoSQL
C/C++
面试
Golang
数据库
Git
算法
正则表达式
操作系统
Redis
互联网
MySql
JavaScript
运维
软件
架构设计
Mac OS
TCP/IP
国际
Excel
Vim
Windows
Socket
Oracle
VR
MongoDB
运营
Python
MemCache
商业
硬件
电子
设计
nginx
娱乐
摄影
游戏
WordPress
HTTP
团建
数码电器
广告
广告
php7 安装fileinfo扩展
preg_split — 通过一个正则表达式分隔字符串
[PHP] inet_pton/inet_ntop IP地址转换函数
php位值,解决 PHP 中 usort 在值相同时改变原始位置的问题
PHPMailer设置utf8 PHPMailer字符集CharSet
如何在Composer中为GitLab实例设置访问令牌
array_multisort() 多字段排序
laravel框架查看sql语句方式
[原创]诡异的php-fpm超时问题
PHP获取指定函数定义在哪个文件中及行号
PHP5 扩展SOAP 调用 webservice
php设置cookie为httponly防止xss攻击
利用php soap实现web service
PHP-FPM进程数的设定
利用PHP SOAP实现WEB SERVICE
纯php实现DES以及TripleDES加密算法
php上周一、本周一、下周一日期
PHPstorm 里面Terminal 不能使用 esc键吗退出编辑模式吗
Composer的Packagist资源
PHP7添加redis扩展