With php 5.2.6, the following code created a new zip or replaced a existing zip.
Note that I am only using the ZIPARCHIVE::OVERWRITE flag.
<?php
$zip = new ZipArchive();
$opened = $zip->open( $zipFileName, ZIPARCHIVE::OVERWRITE );
if( $opened !== true ){
die("cannot open {$zipFileName} for writing.");
}
$zip->addFromString( $name, $contents );
$zip->close();
?>
Now, with php 5.2.8, it does not work and gives this warning:
Warning: ZipArchive::addFromString() [ziparchive.addfromstring]: Invalid or unitialized Zip object in [myfile] on line [myline]
To fix this, you must specify the flags as create or overwrite.
<?php
$zip = new ZipArchive();
$opened = $zip->open( $zipFileName, ZIPARCHIVE::CREATE | ZIPARCHIVE::OVERWRITE );
if( $opened !== true ){
die("cannot open {$zipFileName} for writing.");
}
$zip->addFromString( $name, $contents );
$zip->close();
?>
When googling for the error message I found a lot of people that had it but couldn't figure out why they were getting it.
I hope this helps someone.
PHP - Manual: ZipArchive::open
2024-11-15
ZipArchive::open
(PHP 5 >= 5.2.0, PHP 7, PHP 8, PECL zip >= 1.1.0)
ZipArchive::open — Open a ZIP file archive
说明
public ZipArchive::open(string
$filename, int $flags = 0): bool|intOpens a new or existing zip archive for reading, writing or modifying.
Since libzip 1.6.0, a empty file is not a valid archive any longer.
参数
-
filename -
The file name of the ZIP archive to open.
-
flags -
The mode to use to open the archive.
返回值
Returns true on success, or one of the following error codes:
-
ZipArchive::ER_EXISTS - File already exists.
-
ZipArchive::ER_INCONS - Zip archive inconsistent.
-
ZipArchive::ER_INVAL - Invalid argument.
-
ZipArchive::ER_MEMORY - Malloc failure.
-
ZipArchive::ER_NOENT - No such file.
-
ZipArchive::ER_NOZIP - Not a zip archive.
-
ZipArchive::ER_OPEN - Can't open file.
-
ZipArchive::ER_READ - Read error.
-
ZipArchive::ER_SEEK - Seek error.
范例
示例 #1 Open and extract
<?php
$zip = new ZipArchive;
$res = $zip->open('test.zip');
if ($res === TRUE) {
echo 'ok';
$zip->extractTo('test');
$zip->close();
} else {
echo 'failed, code:' . $res;
}
?>
示例 #2 Create an archive
<?php
$zip = new ZipArchive;
$res = $zip->open('test.zip', ZipArchive::CREATE);
if ($res === TRUE) {
$zip->addFromString('test.txt', 'file content goes here');
$zip->addFile('data.txt', 'entryname.txt');
$zip->close();
echo 'ok';
} else {
echo 'failed';
}
?>
示例 #3 Create an temporary archive
<?php
$name = tempnam(sys_get_temp_dir(), "FOO");
$zip = new ZipArchive;
$res = $zip->open($name, ZipArchive::OVERWRITE); /* truncate as empty file is not valid */
if ($res === TRUE) {
$zip->addFile('data.txt', 'entryname.txt');
$zip->close();
echo 'ok';
} else {
echo 'failed';
}
?>
add a note
User Contributed Notes 21 notes
eric at webdeveric dot com ¶
13 years ago
abolfazl dot ziaratban at gmail dot com ¶
7 years ago
<?php
#made by abolfazl ziaratban (c)
#license GPL
class zip extends ZipArchive
{
public function message($code)
{
switch ($code)
{
case 0:
return 'No error';
case 1:
return 'Multi-disk zip archives not supported';
case 2:
return 'Renaming temporary file failed';
case 3:
return 'Closing zip archive failed';
case 4:
return 'Seek error';
case 5:
return 'Read error';
case 6:
return 'Write error';
case 7:
return 'CRC error';
case 8:
return 'Containing zip archive was closed';
case 9:
return 'No such file';
case 10:
return 'File already exists';
case 11:
return 'Can\'t open file';
case 12:
return 'Failure to create temporary file';
case 13:
return 'Zlib error';
case 14:
return 'Malloc failure';
case 15:
return 'Entry has been changed';
case 16:
return 'Compression method not supported';
case 17:
return 'Premature EOF';
case 18:
return 'Invalid argument';
case 19:
return 'Not a zip archive';
case 20:
return 'Internal error';
case 21:
return 'Zip archive inconsistent';
case 22:
return 'Can\'t remove file';
case 23:
return 'Entry has been deleted';
default:
return 'An unknown error has occurred('.intval($code).')';
}
}
public function isDir($path)
{
return substr($path,-1) == '/';
}
public function getTree()
{
$Tree = array();
$pathArray = array();
for($i=0; $i<$this->numFiles; $i++)
{
$path = $this->getNameIndex($i);
$pathBySlash = array_values(explode('/',$path));
$c = count($pathBySlash);
$temp = &$Tree;
for($j=0; $j<$c-1; $j++)
if(isset($temp[$pathBySlash[$j]]))
$temp = &$temp[$pathBySlash[$j]];
else
{
$temp[$pathBySlash[$j]] = array();
$temp = &$temp[$pathBySlash[$j]];
}
if($this->isDir($path))
$temp[$pathBySlash[$c-1]] = array();
else
$temp[] = $pathBySlash[$c-1];
}
return $Tree;
}
}
?>
ohcc at 163 dot com ¶
6 years ago
<?php
// Use ZipArchive::OVERWRITE when the targetd file does not exist may lead you to an error like this
// Warning: ZipArchive::addFile(): Invalid or uninitialized Zip object
// try ZipArchive::OVERWRITE|ZipArchive::CREATE when you want to replace a zip archive that may not exist
$zip = new ZipArchive;
$rt=$zip->open('i.zip',ZipArchive::OVERWRITE);
echo $rt;
// when i.zip does not exist, $rt is 9, ZipArchive::ER_NOENT, or "No such file."
$zip->addFile('wuxiancheng.cn.sql','db.sql');
// triggers an error with the message "Warning: ZipArchive::addFile(): Invalid or uninitialized Zip object ..."
// Use ZipArchive::OVERWRITE|ZipArchive::CREATE
$zip = new ZipArchive;
$zip->open('i.zip',ZipArchive::OVERWRITE|ZipArchive::CREATE);
$zip->addFile('wuxiancheng.cn.sql','db.sql');
?>
jekillen at prodigy net ¶
7 years ago
Calling ZipArchive->open() will not create an empty zip archive file.
I found this out the hard way. I wrote code that produced positive
results: I.E. the return value from the call to ZipArchive was TRUE
and the empty zip file was not created. So at least call
ZipArchive->addFromString(<filename.zip>, '<minimal content>')
when creating a new zip archive file.
walter at clevertechie dot com ¶
9 years ago
If you have archives that you want to overwrite just use:
ZIPARCHIVE::CREATE
It will overwrite existing archives and at the same time create new ones if they don't already exist.
ZIPARCHIVE::OVERWRITE won't work for both of these scenarios.
(PHP version 5.4.4)
jj at icglink dot com ¶
13 years ago
if you are echoing out the output and confused about the number...maybe this will help. i'm not totally sure it is accurate though.
ZIPARCHIVE::ER_EXISTS - 10
ZIPARCHIVE::ER_INCONS - 21
ZIPARCHIVE::ER_INVAL - 18
ZIPARCHIVE::ER_MEMORY - 14
ZIPARCHIVE::ER_NOENT - 9
ZIPARCHIVE::ER_NOZIP - 19
ZIPARCHIVE::ER_OPEN - 11
ZIPARCHIVE::ER_READ - 5
ZIPARCHIVE::ER_SEEK - 4
sunil dt bhave at gmail dt com ¶
11 years ago
Even though the api specifies that the flags are optional I found that I had to specify the flag ZIPARCHIVE::CREATE for an archive to be opened.
This is on a Windows 7 system with PHP 5.3.0
Jan Vavra ¶
11 years ago
As discussed in http://bugs.php.net/bug.php?id=54128 on Windows Server systems (2003, 2008) and IIS there is a problem when you want to unzip file stored in C:\Windows\Temp folder.
User of worker process IUSR_XXX has no directory listing right for C:\Windows\Temp and this is a reason why ZipArchive::open() fails with error 11 (error open). So it is not a good idea to store file for unzipping in folder defined by sys_get_temp_dir().
rickky at gmail dot com ¶
14 years ago
If the directory you are writing or saving into does not have the correct permissions set, you won't get any error messages and it will look like everything worked fine... except it won't have changed!
Instead make sure you collect the return value of ZipArchive::close(). If it is false... it didn't work.
Eric Langlois ¶
8 years ago
<?PHP
$zip = new ZipArchive;
$res = $zip->open('test.zip', ZipArchive::CREATE);
if ( $res === TRUE) {
//CODE GOES HERE
$zip->close();
} else {
switch($res){
case ZipArchive::ER_EXISTS:
$ErrMsg = "File already exists.";
break;
case ZipArchive::ER_INCONS:
$ErrMsg = "Zip archive inconsistent.";
break;
case ZipArchive::ER_MEMORY:
$ErrMsg = "Malloc failure.";
break;
case ZipArchive::ER_NOENT:
$ErrMsg = "No such file.";
break;
case ZipArchive::ER_NOZIP:
$ErrMsg = "Not a zip archive.";
break;
case ZipArchive::ER_OPEN:
$ErrMsg = "Can't open file.";
break;
case ZipArchive::ER_READ:
$ErrMsg = "Read error.";
break;
case ZipArchive::ER_SEEK:
$ErrMsg = "Seek error.";
break;
default:
$ErrMsg = "Unknow (Code $rOpen)";
break;
}
die( 'ZipArchive Error: ' . $ErrMsg);
}
?>
ohcc at 163 dot com ¶
6 years ago
ZipArchive::OVERWRITE does NOT mean an existing file would be deleted when ZipArchive::open() is called.
In fact, the existing file will be deleted before PHP saves the zip archive on disk.
PHP takes these steps to finish zipping:
1. When ZipArchive::open('xx.zip') is called
If 'xx.zip' exists and is a zip archive, it will be opened and read as a temporary zip file,
If the file does not exist, and ZipArchive::CREATE is applied, php will create a temporary empty zip file
In these cases, ZipArchive::open() returns true, otherwise it returns an integer error code.
2. Adds file(s) to the temporary zip file when methods such as addFile(), addFromString() are called.
3. Deletes the existing file before saving the temporary zip file on disk.
4. Save the temporary zip file on disk
5. Closes the active archive when ZipArchive::close() is called or at the end of the script
Since PHP does NOT delete the existing file before saving the zip archive on disk, you should use unset() to delete it if you want to zip that file's containing folder and save the zip archive in that folder, otherwise you will get a larger and larger zip archive everytime you refresh the page.
ohcc at 163 dot com ¶
6 years ago
return values of ZipArchive::open() and their values and meanings
ZipArchive::ER_SEEK 4 Seek error.
ZipArchive::ER_READ 5 Read error.
ZipArchive::ER_NOENT 9 No such file.
ZipArchive::ER_OPEN 11 Can't open file.
ZipArchive::ER_EXISTS 10 File already exists.
ZipArchive::ER_MEMORY 14 Malloc failure.
ZipArchive::ER_INVAL 18 Invalid argument.
ZipArchive::ER_NOZIP 19 Not a zip archive.
ZipArchive::ER_INCONS 21 Zip archive inconsistent
laacz at laacz dot lv ¶
11 months ago
If on PHP 8.0+, you can use match expression to decode status code:
<?php
$archive = new \ZipArchive();
$result = $archive->open('some.file.zip');
$message = match ($result) {
\ZipArchive::ER_MULTIDISK => 'Multi-disk zip archives not supported',
\ZipArchive::ER_RENAME => 'Renaming temporary file failed',
\ZipArchive::ER_CLOSE => 'Closing zip archive failed',
\ZipArchive::ER_SEEK => 'Seek error',
\ZipArchive::ER_READ => 'Read error',
\ZipArchive::ER_WRITE => 'Write error',
\ZipArchive::ER_CRC => 'CRC error',
\ZipArchive::ER_ZIPCLOSED => 'Containing zip archive was closed',
\ZipArchive::ER_NOENT => 'No such file',
\ZipArchive::ER_EXISTS => 'File already exists',
\ZipArchive::ER_OPEN => 'Can\'t open file',
\ZipArchive::ER_TMPOPEN => 'Failure to create temporary file',
\ZipArchive::ER_ZLIB => 'Zlib error',
\ZipArchive::ER_MEMORY => 'Malloc failure',
\ZipArchive::ER_CHANGED => 'Entry has been changed',
\ZipArchive::ER_COMPNOTSUPP => 'Compression method not supported',
\ZipArchive::ER_EOF => 'Premature EOF',
\ZipArchive::ER_INVAL => 'Invalid argument',
\ZipArchive::ER_NOZIP => 'Not a zip archive',
\ZipArchive::ER_INTERNAL => 'Internal error',
\ZipArchive::ER_INCONS => 'Zip archive inconsistent',
\ZipArchive::ER_REMOVE => 'Can\'t remove file',
\ZipArchive::ER_DELETED => 'Entry has been deleted',
// \ZipArchive::ER_OK => 'No error',
default => 'No error',
};
?>
Anonymous ¶
9 months ago
To read a zip file contents then loop through $zip->numFiles using $zip->getNameIndex(i)
e.g.
$zipfilename=$dir.DIRECTORY_SEPARATOR."test.zip";
$zippedFile = new ZipArchive;
$zippedFile->open($zipfilename);
echo "<LI>".$zippedFile->getFromName("mpdf-8.0.7/.gitignore")."</LI><HR>";
echo "<LI>Loaded $zipfilename ".$zippedFile->numFiles;
for($i = 0; $i < $zippedFile->numFiles; $i++) {
$fn=$zippedFile->getNameIndex($i);
echo "<LI>$i: ".$fn;
if ( strcmp(substr($fn, -1), DIRECTORY_SEPARATOR )==0 ) echo "... directory";
else echo "... ".strlen($zippedFile->getFromIndex($i))." bytes";
}
$zippedFile->close();
Fred Johnson ¶
2 years ago
Note that ZipArchive does not support generating streaming ZIP file content (i.e. start sending data to the user as soon as you start generating it such as from a database). This means you have to write the entire file to disk first and then send the file to the user. Doing that can take a while depending on how much data there is, which could run up against server timeout limits.
There are a couple of PHP userland libraries available on GitHub that can stream ZIP file content out to the user as soon as any data is written to the relevant classes.
cubiclesoft/php-zipstreamwriter
maennchen/ZipStream-PHP
Maybe a future version of ZipArchive will offer something similar.
YiiWanAB at hotmail dot com ¶
10 years ago
Most of the time people iterate over a directory with 'opendir' or 'readdir' to add files to a zip. Like...
while ($file = readdir($dir)) { ... $zip->addFile($file) }
Note that $zip->addFile($file) will only work in the current directory if your at the root. You will need to add the correct path to that $file string variable to have the full file name like ...
$zip->addFile($dir . DIRECTORY_SEPARATOR . $file); will work.
This may identify why you may get a read error when closing the file.
Enjoy.
Jonathan Baltazar ¶
13 years ago
The file name does not need to end in '.zip' if it is created using tempnam(). You just need to overwrite the file instead of trying to read it:
<?php
$file = tempnam("tmp", "zip");
$zip = new ZipArchive();
// Zip will open and overwrite the file, rather than try to read it.
$zip->open($file, ZipArchive::OVERWRITE);
$zip->close();
// Stream the file to the client
header("Content-Type: application/zip");
header("Content-Length: " . filesize($file));
header("Content-Disposition: attachment; filename=\"a_zip_file.zip\"");
readfile($file);
unlink($file);
?>
sebwoolford at gmail dot com ¶
12 years ago
Further to what rickky at gmail dot com was saying, I've had that problem while trying to cache zip files and found that I had to set the permissions of the containing folder to 777 to get it to work.
Because this is a potential security weakness if on a public viewable folder, I'd recommend moving the folder so that it is no longer within public_html. You can then use readfile() to output the archive to the browser, with some HTTP headers to tell the browser it is a zip file.
michael202 at gmx dot de ¶
12 years ago
to anyone getting an error ZIPARCHIVE::ER_READ = 5, when
doing $zip->open($zipfile) with a ZIP file containing a total of more then (around) 800 files (even when they are in sub-directories).
possibly related bugs 40873, 8714:
1. it was not an OS limit, because it worked when called from windows via samba on the same file at the same place
2. it wasn't working under 32bit linux
with php 5.3.0 the issue seems to be resolved.
azsymvelik at gmail dot com ¶
13 years ago
<?php
/*
Hi!
I made a little script about checking content and "secure repacking"
*/
$somefile = "zip.zip";
$someurl = "/some/url"
$zip = new ZipArchive;
$open = $zip->open($somefile, ZIPARCHIVE::CHECKCONS);
// If the archive is broken(or just another file renamed to *.zip) the function will return error on httpd under windows, so it's good to check if the archive is ok with ZIPARCHIVE::CHECKCONS
if ($open === TRUE) {
if(!$zip->extractTo($someurl)) {
die ("Error during extracting");
}
$zip->close();
}
$new_archive_name = "new.zip";
$new_zip = new ZipArchive;
$new_open = $new_zip->open($new_archive_name, ZIPARCHIVE::CREATE);
if ($new_open === TRUE) {
$dir = opendir($someurl);
while ($file = readdir($dir)) {
if ($file == "." || $file == "..") { } else {
//We do not wanna this files in the new zip archive
if (!$new_zip->addFile($file)) {
print $file."was not added!<br />";
}
}
}
}
$new_zip->close();
?>
olivier pons ¶
14 years ago
If you try this to open a file with creation in mind (= empty zip to fill with other files), this may not work :
$res = $zip->open($zip_file, ZipArchive::CREATE);
// you may get false
Try this instead, it should work :
$res = $zip->open($zip_file, ZIPARCHIVE::OVERWRITE);
IT
PHP
编程语言
Linux
开发编程
科技
Elasticsearch
HTML/CSS/XML
网络
JAVA
NoSQL
数据库
面试
C/C++
Golang
Git
算法
操作系统
正则表达式
Redis
互联网
MySql
JavaScript
运维
软件
国际
架构设计
Mac OS
TCP/IP
Excel
Vim
Windows
Socket
Oracle
VR
MongoDB
Python
运营
MemCache
商业
硬件
电子
娱乐
设计
nginx
摄影
游戏
WordPress
HTTP
团建
数码电器
广告
--
php7 安装fileinfo扩展
preg_split — 通过一个正则表达式分隔字符串
php位值,解决 PHP 中 usort 在值相同时改变原始位置的问题
[PHP] inet_pton/inet_ntop IP地址转换函数
array_multisort() 多字段排序
PHPMailer设置utf8 PHPMailer字符集CharSet
ADORecordSet对象
adodb手册
PHP 8.1
[鸟哥]PHP_INT_MIN 和 -9223372036854775808
opcache预加载
Composer的Packagist资源
mysql面试题
[鸟哥]PHP FFI详解 - 一种全新的PHP扩展方式
PHP7添加redis扩展
Packagist / Composer 中国全量镜像
PHP获取指定函数定义在哪个文件中及行号
PHP mkdir()写出来的权限与mode值不符合
adodb连接mysql多个数据库的问题
PHPstorm 里面Terminal 不能使用 esc键吗退出编辑模式吗