For getting a substring of UTF-8 characters, I highly recommend mb_substr
<?php
$utf8string = "cakeæøå";
echo substr($utf8string,0,5);
// output cake#
echo mb_substr($utf8string,0,5,'UTF-8');
//output cakeæ
?>
PHP - Manual: substr
2024-12-23
substr
(PHP 4, PHP 5, PHP 7, PHP 8)
substr — 返回字符串的子串
说明
substr(string
$string, int $offset, ?int $length = null): string
返回字符串 string 由 offset 和 length 参数指定的子字符串。
参数
-
string -
输入字符串。
-
offset -
如果
offset是非负数，返回的字符串将从string的offset位置开始，从 0 开始计算。例如，在字符串 “abcdef” 中，在位置0的字符是 “a”，位置2的字符串是 “c” 等等。如果
offset是负数，返回的字符串将从string结尾处向前数第offset个字符开始。如果
string的长度小于offset，将返回空字符串。示例 #1 使用负数
offset<?php
$rest = substr("abcdef", -1); // 返回 "f"
$rest = substr("abcdef", -2); // 返回 "ef"
$rest = substr("abcdef", -3, 1); // 返回 "d"
?> -
length -
如果提供了正数的
length，返回的字符串将从offset处开始最多包括length个字符（取决于string的长度）。如果提供了负数的
length，那么string末尾处的length个字符将会被省略（若offset是负数则从字符串尾部算起）。如果offset不在这段文本中，那么将返回空字符串。如果提供了值为
0的length，那么将返回一个空字符串。如果没有提供
length，返回的子字符串将从offset位置开始直到字符串结尾。示例 #2 使用负数
length<?php
$rest = substr("abcdef", 0, -1); // 返回 "abcde"
$rest = substr("abcdef", 2, -1); // 返回 "cde"
$rest = substr("abcdef", 4, -4); // 返回 ""; 在 PHP 8.0.0 之前，返回 false
$rest = substr("abcdef", -3, -1); // 返回 "de"
?>
返回值
返回提取的 string 部分或者空字符串。
更新日志
| 版本 | 说明 |
|---|---|
| 8.0.0 |
现在 length 允许为 null。
|
| 8.0.0 |
函数将返回一个空字符串, 在此之前返回 false 。
|
范例
示例 #3 substr() 基本用法
<?php
echo substr('abcdef', 1); // bcdef
echo substr("abcdef", 1, null); // bcdef; 在 PHP 8.0.0 之前，返回空字符串
echo substr('abcdef', 1, 3); // bcd
echo substr('abcdef', 0, 4); // abcd
echo substr('abcdef', 0, 8); // abcdef
echo substr('abcdef', -1, 1); // f
// 访问字符串中的单个字符
// 也可以使用中括号
$string = 'abcdef';
echo $string[0]; // a
echo $string[3]; // d
echo $string[strlen($string)-1]; // f
?>
示例 #4 substr() casting behaviour
<?php
class apple {
public function __toString() {
return "green";
}
}
echo "1) ".var_export(substr("pear", 0, 2), true).PHP_EOL;
echo "2) ".var_export(substr(54321, 0, 2), true).PHP_EOL;
echo "3) ".var_export(substr(new apple(), 0, 2), true).PHP_EOL;
echo "4) ".var_export(substr(true, 0, 1), true).PHP_EOL;
echo "5) ".var_export(substr(false, 0, 1), true).PHP_EOL;
echo "6) ".var_export(substr("", 0, 1), true).PHP_EOL;
echo "7) ".var_export(substr(1.2e3, 0, 4), true).PHP_EOL;
?>
以上例程会输出：
1) 'pe' 2) '54' 3) 'gr' 4) '1' 5) '' 6) '' 7) '1200'
示例 #5 无效字符范围
如果请求的字符范围无效, substr() 从
PHP 8.0.0 开始返回空字符串；在此之前返回 false 。
<?php
var_dump(substr('a', 2));
?>
以上例程在 PHP 8 中的输出：
string(0) ""
以上例程在 PHP 7 中的输出：
bool(false)
参见
- strrchr() - 查找指定字符在字符串中的最后一次出现
- substr_replace() - 替换字符串的子串
- preg_match() - 执行匹配正则表达式
- trim() - 去除字符串首尾处的空白字符（或者其他字符）
- mb_substr() - 获取部分字符串
- wordwrap() - 打断字符串为指定数量的字串
- 字符串访问和修改
add a note
User Contributed Notes 36 notes
Andreas Bur (andreas dot buro at gmail dot com) ¶
13 years ago
biohazard dot ge at gmail dot com ¶
8 years ago
may be by following functions will be easier to extract the needed sub parts from a string:
<?php
after ('@', 'biohazard@online.ge');
//returns 'online.ge'
//from the first occurrence of '@'
before ('@', 'biohazard@online.ge');
//returns 'biohazard'
//from the first occurrence of '@'
between ('@', '.', 'biohazard@online.ge');
//returns 'online'
//from the first occurrence of '@'
after_last ('[', 'sin[90]*cos[180]');
//returns '180]'
//from the last occurrence of '['
before_last ('[', 'sin[90]*cos[180]');
//returns 'sin[90]*cos['
//from the last occurrence of '['
between_last ('[', ']', 'sin[90]*cos[180]');
//returns '180'
//from the last occurrence of '['
?>
here comes the source:
<?php
function after ($this, $inthat)
{
if (!is_bool(strpos($inthat, $this)))
return substr($inthat, strpos($inthat,$this)+strlen($this));
};
function after_last ($this, $inthat)
{
if (!is_bool(strrevpos($inthat, $this)))
return substr($inthat, strrevpos($inthat, $this)+strlen($this));
};
function before ($this, $inthat)
{
return substr($inthat, 0, strpos($inthat, $this));
};
function before_last ($this, $inthat)
{
return substr($inthat, 0, strrevpos($inthat, $this));
};
function between ($this, $that, $inthat)
{
return before ($that, after($this, $inthat));
};
function between_last ($this, $that, $inthat)
{
return after_last($this, before_last($that, $inthat));
};
// use strrevpos function in case your php version does not include it
function strrevpos($instr, $needle)
{
$rev_pos = strpos (strrev($instr), strrev($needle));
if ($rev_pos===false) return false;
else return strlen($instr) - $rev_pos - strlen($needle);
};
?>
bleakwind at msn dot com ¶
17 years ago
This returns the portion of str specified by the start and length parameters..
It can performs multi-byte safe on number of characters. like mb_strcut() ...
Note:
1.Use it like this bite_str(string str, int start, int length [,byte of on string]);
2.First character's position is 0. Second character position is 1, and so on...
3.$byte is one character length of your encoding, For example: utf-8 is "3", gb2312 and big5 is "2"...you can use the function strlen() get it...
Enjoy it :) ...
--- Bleakwind
QQ:940641
http://www.weaverdream.com
PS:I'm sorry my english is too poor... :(
<?php
// String intercept By Bleakwind
// utf-8:$byte=3 | gb2312:$byte=2 | big5:$byte=2
function bite_str($string, $start, $len, $byte=3)
{
$str = "";
$count = 0;
$str_len = strlen($string);
for ($i=0; $i<$str_len; $i++) {
if (($count+1-$start)>$len) {
$str .= "...";
break;
} elseif ((ord(substr($string,$i,1)) <= 128) && ($count < $start)) {
$count++;
} elseif ((ord(substr($string,$i,1)) > 128) && ($count < $start)) {
$count = $count+2;
$i = $i+$byte-1;
} elseif ((ord(substr($string,$i,1)) <= 128) && ($count >= $start)) {
$str .= substr($string,$i,1);
$count++;
} elseif ((ord(substr($string,$i,1)) > 128) && ($count >= $start)) {
$str .= substr($string,$i,$byte);
$count = $count+2;
$i = $i+$byte-1;
}
}
return $str;
}
// Test
$str = "123456???ֽ?123456?ַ???123456??ȡ????";
for($i=0;$i<30;$i++){
echo "<br>".bite_str($str,$i,20);
}
?>
gkhelloworld at gmail dot com ¶
12 years ago
Shortens the filename and its expansion has seen.
<?php
$file = "Hellothisfilehasmorethan30charactersandthisfayl.exe";
function funclongwords($file)
{
if (strlen($file) > 30)
{
$vartypesf = strrchr($file,".");
$vartypesf_len = strlen($vartypesf);
$word_l_w = substr($file,0,15);
$word_r_w = substr($file,-15);
$word_r_a = substr($word_r_w,0,-$vartypesf_len);
return $word_l_w."...".$word_r_a.$vartypesf;
}
else
return $file;
}
// RETURN: Hellothisfileha...andthisfayl.exe
?>
pugazhenthi k ¶
9 years ago
<?Php
### SUB STRING BY WORD USING substr() and strpos() #####
### THIS SCRIPT WILL RETURN PART OF STRING WITHOUT WORD BREAK ###
$description = ‘your description here your description here your description here your description here your description here your description here your description hereyour description here your description here’ // your description here .
$no_letter = 30 ;
if(strlen($desctiption) > 30 )
{
echo substr($description,0,strpos($description,’ ‘,30)); //strpos to find ‘ ‘ after 30 characters.
}
else {
echo $description;
}
?>
greg at apparel dot com ¶
8 years ago
Coming to PHP from classic ASP I am used to the Left() and Right() functions built into ASP so I did a quick PHPversion. hope these help someone else making the switch
function left($str, $length) {
return substr($str, 0, $length);
}
function right($str, $length) {
return substr($str, -$length);
}
nikolai dot wuestemann at t-online dot de ¶
11 years ago
If you want to have a string BETWEEN two strings, just use this function:
<?php
function get_between($input, $start, $end)
{
$substr = substr($input, strlen($start)+strpos($input, $start), (strlen($input) - strpos($input, $end))*(-1));
return $substr;
}
//Example:
$string = "123456789";
$a = "12";
$b = "9";
echo get_between($string, $a, $b);
//Output:
//345678
?>
Petez ¶
14 years ago
I wanted to work out the fastest way to get the first few characters from a string, so I ran the following experiment to compare substr, direct string access and strstr:
<?php
/* substr access */
beginTimer();
for ($i = 0; $i < 1500000; $i++){
$opening = substr($string,0,11);
if ($opening == 'Lorem ipsum'){
true;
}else{
false;
}
}
$endtime1 = endTimer();
/* direct access */
beginTimer();
for ($i = 0; $i < 1500000; $i++){
if ($string[0] == 'L' && $string[1] == 'o' && $string[2] == 'r' && $string[3] == 'e' && $string[4] == 'm' && $string[5] == ' ' && $string[6] == 'i' && $string[7] == 'p' && $string[8] == 's' && $string[9] == 'u' && $string[10] == 'm'){
true;
}else{
false;
}
}
$endtime2 = endTimer();
/* strstr access */
beginTimer();
for ($i = 0; $i < 1500000; $i++){
$opening = strstr($string,'Lorem ipsum');
if ($opening == true){
true;
}else{
false;
}
}
$endtime3 = endTimer();
echo $endtime1."\r\n".$endtime2."\r\n".$endtime3;
?>
The string was 6 paragraphs of Lorem Ipsum, and I was trying match the first two words. The experiment was run 3 times and averaged. The results were:
(substr) 3.24
(direct access) 11.49
(strstr) 4.96
(With standard deviations 0.01, 0.02 and 0.04)
THEREFORE substr is the fastest of the three methods for getting the first few letters of a string.
kaysar in ymail in com ¶
13 years ago
Drop extensions of a file (even from a file location string)
<?php
$filename = "c:/some dir/abc defg. hi.jklmn";
echo substr($filename, 0, (strlen ($filename)) - (strlen (strrchr($filename,'.'))));
?>
output: c:/some dir/abc defg. hi
Hope it may help somebody like me.. (^_^)
link ¶
13 years ago
I created some functions for entity-safe splitting+lengthcounting:
<?php
function strlen_entities($text)
{
preg_match_all(
'/((?:&(?:#[0-9]{2,}|[a-z]{2,});)|(?:[^&])|'.
'(?:&(?!\w;)))s',$text,$textarray);
return count($textarray[0]);
}
function substr_entities($text,$start,$limit=0)
{
$return = '';
preg_match_all(
'/((?:&(?:#[0-9]{2,}|[a-z]{2,});)|(?:[^&])|'.
'(?:&(?!\w;)))s',$text,$textarray);
$textarray = $textarray[0];
$numchars = count($textarray)-1;
if ($start>=$numchars)
return false;
if ($start<0)
{
$start = ($numchars)+$start+1;
}
if ($start>=0)
{
if ($limit==0)
{
$end=$numchars;
}
elseif ($limit>0)
{
$end = $start+($limit-1);
}
else
{
$end = ($numchars)+$limit;
}
for ($i=$start;$i<=$end;$i++)
{
$return .= $textarray[$i];
}
return $return;
}
}
?>
Anonymous ¶
4 years ago
Be aware of a slight inconsistency between substr and mb_substr
mb_substr("", 4); returns empty string
substr("", 4); returns boolean false
tested in PHP 7.1.11 (Fedora 26) and PHP 5.4.16 (CentOS 7.4)
pheagey at gmail dot com ¶
10 years ago
Using a 0 as the last parameter for substr().
As per examples
<?php $var = substr($var, 4); ?>
works no problem. However
<?php $var = substr($var, 4, 0); ?>
will get you nothing. Just a quick heads up
Cristianlf ¶
11 years ago
I needed a function like lpad from oracle, or right from SQL
then I use this code :
<?php
function right($string,$chars)
{
$vright = substr($string, strlen($string)-$chars,$chars);
return $vright;
}
echo right('0r0j4152',4);
?>
Result:
4152
------------------------------------------------
This function is really simple, I just wanted to share, maybe helps someone out there.
regards,
fanfatal at fanfatal dot pl ¶
17 years ago
Hmm ... this is a script I wrote, whitch is very similar to substr, but it isn't takes html and bbcode for counting and it takes portion of string and show avoided (html & bbcode) tags too ;]
Specially usefull for show part of serach result included html and bbcode tags
<?php
/**
* string csubstr ( string string, int start [, int length] )
*
* @author FanFataL
* @param string string
* @param int start
* @param [int length]
* @return string
*/
function csubstr($string, $start, $length=false) {
$pattern = '/(\[\w+[^\]]*?\]|\[\/\w+\]|<\w+[^>]*?>|<\/\w+>)/i';
$clean = preg_replace($pattern, chr(1), $string);
if(!$length)
$str = substr($clean, $start);
else {
$str = substr($clean, $start, $length);
$str = substr($clean, $start, $length + substr_count($str, chr(1)));
}
$pattern = str_replace(chr(1),'(.*?)',preg_quote($str));
if(preg_match('/'.$pattern.'/is', $string, $matched))
return $matched[0];
return $string;
}
?>
Using this is similar to simple substr.
Greatings ;]
...
fatihmertdogancan at hotmail dot com ¶
8 years ago
[English]
I created python similar accesing list or string with php substr & strrev functions.
Use: str($string,$pattern)
About the python pattern,
http://docs.python.org/release/1.5.1p1/tut/strings.html
http://effbot.org/zone/python-list.htm
About of pattern structures
[start:stop:step]
Example,
<?php
$s = "fatihmertdogancan";
echo str($s,"1:9:-2");
echo "<br/>";
echo str($s,"1:-3:-2");
echo "<br/>";
echo str($s,"1:-11:-5");
echo "<br/>";
echo str($s,"1:9:4");
?>
Output,
thetoacn
eht
aom
htan
This is function phpfiddle link: http://phpfiddle.org/main/code/e82-y5d
or source;
<?php
function str($str,$pattern){
//[start:stop:step]
//pattern -> ([-]?[0-9]*|\s):([-]?[0-9]*|\s):([-]?[0-9]*|\s)
preg_match("/([-]?[0-9]*|\s?):([-]?[0-9]*|\s?):?([-]?[0-9]*|\s?)/", $pattern, $yakala);
$start = $yakala[1];
$stop = $yakala[2];
$step = $yakala[3];
if(empty($start) && empty($stop) && $step == "-1"){//istisna durum
return strrev($str);
}else if(empty($start) && empty($stop) && isset($step)){//istisna durum
$rev = "";
$yeni = "";
if($step[0] == "-" && $stop != "-1"){$rev = "VAR";}
$atla = abs($step);
for($i = 0; $i <= strlen($str); $i++){
$offset = $i*$atla;
if(isset($str[$offset])){
$yeni = $yeni.$str[$offset];
}
}
if($rev != "VAR"){
return substr($yeni,0,strlen($str)-1);
//"hepsi boş, step dolu o da +";
}else{
return strrev(substr($yeni,0,strlen($str)-1));
//"hepsi boş, step dolu o da -";
}
}
if(empty($start) && empty($stop) && empty($step)){
return $str;
//"hepsi boş";
}else if(empty($start)){
if(isset($stop) && empty($step)){
$rev = "";
if($stop[0] == "-"){$rev = "VAR";}
if($rev != "VAR"){
return substr($str,0,$stop);
//"start ve step boş, stop dolu"
}else{
return strrev(substr($str,0,$stop));
//"start ve step boş, stop -1";
}
}else if(isset($stop) && isset($step)){
$rev = "";
if($stop[0] == "-"){$rev = "VAR";}
$yeni = "";
if($step == 1){
if($rev != "VAR"){
return $str;
//"start boş, stop ve step dolu, step 1";
}else{
return strrev(substr($str,0,abs($stop))); //abs -> mutlak değer (-5 = 5)
//"start boş, stop -, step dolu, step 1";
}
}else{
$atla = abs($step);
for($i = 0; $i <= strlen($str); $i++){
$offset = $i*$atla;
if(isset($str[$offset])){
$yeni = $yeni.$str[$offset];
}
}
if($rev != "VAR"){
return substr($yeni,0,$stop);
//"start boş, step ve stop dolu";
}else{
return strrev(substr($yeni,0,abs($stop)));
//"start boş, step ve stop -";
}
}
}
//start boş değilse
}else if(!empty($start)){
if(isset($stop) && empty($step)){
$rev = "";
if($stop[0] == "-"){$rev = "VAR";}
if($rev != "VAR"){
return substr($str,$start,$stop);
//return "step boş, start ve stop dolu";
}else{
return strrev(substr($str,0,abs($stop)));
//"step boş, start ve stop dolu, stop -";
}
}else if(isset($stop) && isset($step)){
//hepsi dolu
$rev = "";
if($stop[0] == "-"){$rev = "VAR";}
$yeni = "";
if($step == 1){
if($rev != "VAR"){
return substr($str,$start,$stop);
//"hepsi dolu, step 1";
}else{
return substr($str,$start,abs($stop));
//"hepsi dolu, step 1, stop -";
}
}else{
if($stop[0] == "-"){$rev = "VAR";}
$atla = abs($step);
for($i = 0; $i <= strlen($str); $i++){
$offset = $i*$atla;
if(isset($str[$offset])){
$yeni = $yeni.$str[$offset];
}
}
if($rev != "VAR"){
return substr($yeni,$start,$stop);
//"hepsi dolu";
}else{
return strrev(substr($yeni,$start,abs($stop)));
//"hepsi dolu, stop -";
}
}
}
}
}
?>
Good works..
egingell at sisna dot com ¶
15 years ago
<?php
/**
* string substrpos(string $str, mixed $start [[, mixed $end], boolean $ignore_case])
*
* If $start is a string, substrpos will return the string from the position of the first occuring $start to $end
*
* If $end is a string, substrpos will return the string from $start to the position of the first occuring $end
*
* If the first character in (string) $start or (string) $end is '-', the last occuring string will be used.
*
* If $ignore_case is true, substrpos will not care about the case.
* If $ignore_case is false (or anything that is not (boolean) true, the function will be case sensitive.
* Both of the above: only applies if either $start or $end are strings.
*
* echo substrpos('This is a string with 0123456789 numbers in it.', 5, '5');
* // Prints 'is a string with 01234';
*
* echo substrpos('This is a string with 0123456789 numbers in it.', '5', 5);
* // Prints '56789'
*
* echo substrpos('This is a string with 0123456789 numbers in it and two strings.', -60, '-string')
* // Prints 's is a string with 0123456789 numbers in it and two '
*
* echo substrpos('This is a string with 0123456789 numbers in it and two strings.', -60, '-STRING', true)
* // Prints 's is a string with 0123456789 numbers in it and two '
*
* echo substrpos('This is a string with 0123456789 numbers in it and two strings.', -60, '-STRING', false)
* // Prints 's is a string with 0123456789 numbers in it and two strings.'
*
* Warnings:
* Since $start and $end both take either a string or an integer:
* If the character or string you are searching $str for is a number, pass it as a quoted string.
* If $end is (integer) 0, an empty string will be returned.
* Since this function takes negative strings ('-search_string'):
* If the string your using in $start or $end is a '-' or begins with a '-' escape it with a '\'.
* This only applies to the *first* character of $start or $end.
*/
// Define stripos() if not defined (PHP < 5).
if (!is_callable("stripos")) {
function stripos($str, $needle, $offset = 0) {
return strpos(strtolower($str), strtolower($needle), $offset);
}
}
function substrpos($str, $start, $end = false, $ignore_case = false) {
// Use variable functions
if ($ignore_case === true) {
$strpos = 'stripos'; // stripos() is included above in case it's not defined (PHP < 5).
} else {
$strpos = 'strpos';
}
// If end is false, set it to the length of $str
if ($end === false) {
$end = strlen($str);
}
// If $start is a string do what's needed to make it an integer position for substr().
if (is_string($start)) {
// If $start begins with '-' start processing until there's no more matches and use the last one found.
if ($start{0} == '-') {
// Strip off the '-'
$start = substr($start, 1);
$found = false;
$pos = 0;
while(($curr_pos = $strpos($str, $start, $pos)) !== false) {
$found = true;
$pos = $curr_pos + 1;
}
if ($found === false) {
$pos = false;
} else {
$pos -= 1;
}
} else {
// If $start begins with '\-', strip off the '\'.
if ($start{0} . $start{1} == '\-') {
$start = substr($start, 1);
}
$pos = $strpos($str, $start);
}
$start = $pos !== false ? $pos : 0;
}
// Chop the string from $start to strlen($str).
$str = substr($str, $start);
// If $end is a string, do exactly what was done to $start, above.
if (is_string($end)) {
if ($end{0} == '-') {
$end = substr($end, 1);
$found = false;
$pos = 0;
while(($curr_pos = strpos($str, $end, $pos)) !== false) {
$found = true;
$pos = $curr_pos + 1;
}
if ($found === false) {
$pos = false;
} else {
$pos -= 1;
}
} else {
if ($end{0} . $end{1} == '\-') {
$end = substr($end, 1);
}
$pos = $strpos($str, $end);
}
$end = $pos !== false ? $pos : strlen($str);
}
// Since $str has already been chopped at $start, we can pass 0 as the new $start for substr()
return substr($str, 0, $end);
}
?>
mar dot czapla at gmail dot com ¶
13 years ago
Here we have gr8 function which simply convert ip address to a number using substr with negative offset.
You can need it if you want to compare some IP addresses converted to a numbers.
For example when using ip2country, or eliminating same range of ip addresses from your website :D
<?php
function ip2no($val)
{
list($A,$B,$C,$D) = explode(".",$val);
return
substr("000".$A,-3).
substr("000".$B,-3).
substr("000".$C,-3).
substr("000".$D,-3);
}
$min = ip2no("10.11.1.0");
$max = ip2no("111.11.1.0");
$visitor = ip2no("105.1.20.200");
if($min<$visitor && $visitor<$max)
{ echo 'Welcome !'; }
else
{ echo 'Get out of here !'; }
?>
slow at acedsl dot com ¶
11 years ago
Anyone coming from the Python world will be accustomed to making substrings by using a "slice index" on a string. The following function emulates basic Python string slice behavior. (A more elaborate version could be made to support array input as well as string, and the optional third "step" argument.)
<?php
function py_slice($input, $slice) {
$arg = explode(':', $slice);
$start = intval($arg[0]);
if ($start < 0) {
$start += strlen($input);
}
if (count($arg) === 1) {
return substr($input, $start, 1);
}
if (trim($arg[1]) === '') {
return substr($input, $start);
}
$end = intval($arg[1]);
if ($end < 0) {
$end += strlen($input);
}
return substr($input, $start, $end - $start);
}
print py_slice('abcdefg', '2') . "\n";
print py_slice('abcdefg', '2:4') . "\n";
print py_slice('abcdefg', '2:') . "\n";
print py_slice('abcdefg', ':4') . "\n";
print py_slice('abcdefg', ':-3') . "\n";
print py_slice('abcdefg', '-3:') . "\n";
?>
The $slice parameter can be a single character index, or a range separated by a colon. The start of the range is inclusive and the end is exclusive, which may be counterintuitive. (Eg, py_slice('abcdefg', '2:4') yields 'cd' not 'cde'). A negative range value means to count from the end of the string instead of the beginning. Both the start and end of the range may be omitted; the start defaults to 0 and the end defaults to the total length of the input.
The output from the examples:
c
cd
cdefg
abcd
abcd
efg
Quicker ¶
11 years ago
If you need to parse utf-8 strings char by char, try this one:
<?php
$utf8marker=chr(128);
$count=0;
while(isset($string{$count})){
if($string{$count}>=$utf8marker) {
$parsechar=substr($string,$count,2);
$count+=2;
} else {
$parsechar=$string{$count};
$count++;
}
/* do what you like with parsechar ... , eg.:*/ echo $parsechar."<BR>\r\n";
}
?>
- it works without mb_substr
- it is fast, because it grabs characters based on indexes when possible and avoids any count and split functions
php_net at thomas dot trella dot de ¶
16 years ago
I needed to cut a string after x chars at a html converted utf-8 text (for example Japanese text like 嬰謰弰脰欰罏).
The problem was, the different length of the signs, so I wrote the following function to handle that.
Perhaps it helps.
<?php
function html_cutstr ($str, $len)
{
if (!preg_match('/\&#[0-9]*;.*/i', $str))
{
$rVal = strlen($str, $len);
break;
}
$chars = 0;
$start = 0;
for($i=0; $i < strlen($str); $i++)
{
if ($chars >= $len)
break;
$str_tmp = substr($str, $start, $i-$start);
if (preg_match('/\&#[0-9]*;.*/i', $str_tmp))
{
$chars++;
$start = $i;
}
}
$rVal = substr($str, 0, $start);
if (strlen($str) > $start)
$rVal .= " ...";
return $rVal;
}
?>
leon weidauer ¶
10 years ago
When using a value of a wrong type as second parameter , substr() does not return FALSE but NULL although the docs say, it should return FALSE on error.
Prior to PHP 5.3, substr() tries to cast the second parameter to int and doesn't throw any errors. Since PHP 5.3 a warning is thrown.
post [at] jannik - zappe [dot] de ¶
13 years ago
Just a little function to cut a string by the wanted amount. Works in both directions.
<?php
function cutString($str, $amount = 1, $dir = "right")
{
if(($n = strlen($str)) > 0)
{
if($dir == "right")
{
$start = 0;
$end = $n-$amount;
} elseif( $dir == "left") {
$start = $amount;
$end = $n;
}
return substr($str, $start, $end);
} else return false;
}
?>
Enjoy ;)
vnonov at gmail dot com / Viktor Nonov ¶
12 years ago
<?php
//removes string from the end of other
function removeFromEnd($string, $stringToRemove) {
$stringToRemoveLen = strlen($stringToRemove);
$stringLen = strlen($string);
$pos = $stringLen - $stringToRemoveLen;
$out = substr($string, 0, $pos);
return $out;
}
$string = 'picture.jpg.jpg';
$string = removeFromEnd($string, '.jpg');
?>
robinhood70 at live dot ca ¶
1 year ago
Prior to PHP 8, specifying length with zero-length strings or non-string values as input can produce potentially unexpected results.
<?php
foreach (['normal', '', true, false, NULL] as $value) {
echo gettype(substr($value, 0, 10)) . ' ' . substr($value, 0, 10);
}
/*
string normal
boolean
string 1
boolean
boolean
*/
?>
webmaster at oehoeboeroe dot nl ¶
13 years ago
You might expect substr('123456', 6) to return an empty string. Instead it returns boolean FALSE.
This behavior should be mentioned in the Return Values section of the manual. Instead it is only mentioned in the Parameters section.
If you need an empty string instead of a boolean FALSE you should typecast the result to a string.
<?php
$a = substr('123456', 6); // equivalent to $a = FALSE
$a = (string) substr('123456', 6); // equivalent to $a = '';
?>
rob NOSPAM at clancentric dot net ¶
17 years ago
I have developed a function with a similar outcome to jay's
Checks if the last character is or isnt a space. (does it the normal way if it is)
It explodes the string into an array of seperate works, the effect is... it chops off anything after and including the last space.
<?php
function limit_string($string, $charlimit)
{
if(substr($string,$charlimit-1,1) != ' ')
{
$string = substr($string,'0',$charlimit);
$array = explode(' ',$string);
array_pop($array);
$new_string = implode(' ',$array);
return $new_string.'...';
}
else
{
return substr($string,'0',$charlimit-1).'...';
}
}
?>
Bradley from California ¶
16 years ago
Add on to (a function originally written by) "Matias from Argentina": str_format_number function.
Just added handling of $String shorter then $Format by adding a side to start the fill and a string length to the while loop.
<?php
function str_format_number($String, $Format, $Start = 'left'){
//If we want to fill from right to left incase string is shorter then format
if ($Start == 'right') {
$String = strrev($String);
$Format = strrev($Format);
}
if($Format == '') return $String;
if($String == '') return $String;
$Result = '';
$FormatPos = 0;
$StringPos = 0;
while ((strlen($Format) - 1) >= $FormatPos && strlen($String) > $StringPos) {
//If its a number => stores it
if (is_numeric(substr($Format, $FormatPos, 1))) {
$Result .= substr($String, $StringPos, 1);
$StringPos++;
//If it is not a number => stores the caracter
} else {
$Result .= substr($Format, $FormatPos, 1);
}
//Next caracter at the mask.
$FormatPos++;
}
if ($Start == 'right') $Result = strrev($Result);
return $Result;
}
?>
frank at jkelloggs dot dk ¶
16 years ago
Regarding the utf8_substr function from lmak: The pattern '/./u' doesn't match newline characters. This means that the substring from 0 to the total length of the string will miss the number of characters in the end matching the number of newlines in the string. To fix this one can add the s modifier (PCRE_DOTALL) in the pattern:
<?php
function utf8_substr($str,$start)
{
preg_match_all("/./su", $str, $ar);
if(func_num_args() >= 3) {
$end = func_get_arg(2);
return join("",array_slice($ar[0],$start,$end));
} else {
return join("",array_slice($ar[0],$start));
}
}
?>
link ¶
13 years ago
And as always there is bound to be a bug:
<?php
function strlen_entities($text)
{
preg_match_all(
'/((?:&(?:#[0-9]{2,}|[a-z]{2,});)|(?:[^&])|'.
'(?:&(?!\w;)))s',$text,$textarray);
return count($textarray[0]);
}
function substr_entities($text,$start,$limit=0)
{
$return = '';
preg_match_all(
'/((?:&(?:#[0-9]{2,}|[a-z]{2,});)|(?:[^&])|'.
'(?:&(?!\w;)))s',$text,$textarray);
$textarray = $textarray[0];
$numchars = count($textarray)-1;
if ($start>=$numchars)
return false;
if ($start<0)
{
$start = ($numchars)+$start+1;
}
if ($start>=0)
{
if ($limit==0)
{
$end=$numchars;
}
elseif ($limit>0)
{
$end = $start+($limit-1);
}
else
{
$end = ($numchars)+$limit;
}
for ($i=$start;($i<=$end && isset($textarray[$i]));$i++)
{
$return .= $textarray[$i];
}
return $return;
}
}
?>
ivanhoe011 at gmail dot com ¶
17 years ago
If you need just a single character from the string you don't need to use substr(), just use curly braces notation:
<?php
// both lines will output the 3rd character
echo substr($my_string, 2, 1);
echo $my_string{2};
?>
curly braces syntax is faster and more readable IMHO..
woutermb at gmail dot com ¶
17 years ago
Well this is a script I wrote, what it does is chop up long words with malicious meaning into several parts. This way, a chat in a table will not get stretched anymore.
<?php
function text($string,$limit=20,$chop=10){
$text = explode(" ",$string);
while(list($key, $value) = each($text)){
$length = strlen($value);
if($length >=20){
for($i=0;$i<=$length;$i+=10){
$new .= substr($value, $i, 10);
$new .= " ";
}
$post .= $new;
}
elseif($length <=15){
$post .= $value;
}
$post .= " ";
}
return($post);
}
// for example, this would return:
$output = text("Well this text doesn't get cut up, yet thisssssssssssssssssssssssss one does.", 10, 5);
echo($output); // "Well this text doesn't get cup up, yet thiss sssss sssss sssss sssss sss one does."
?>
I hope it was useful.. :)
kriskra at gmail dot com ¶
14 years ago
The javascript charAt equivalent in php of felipe has a little bug. It's necessary to compare the type (implicit) aswell or the function returns a wrong result:
<?php
function charAt($str,$pos) {
return (substr($str,$pos,1) !== false) ? substr($str,$pos,1) : -1;
}
?>
steve at unicycle dot co dot nz ¶
17 years ago
To quickly trim an optional trailing slash off the end of a path name:
if (substr( $path, -1 ) == '/') $path = substr( $path, 0, -1 );
Nadeem ¶
8 years ago
Truncate a float number. Similar to the Excel trunc function.
<?php
function truncate_number($val,$decimals=2){
$number=array();
$number=explode(".",$val);
$result=0;
if (count($number)>1){
$result = $number[0] . "." . substr($number[1],0,$decimals);
} else {
$result = $val;
}
unset($number);
return $result;
}
echo truncate_number(99.123456,2); //result = 99.12
echo truncate_number(99.123456,5); //result = 99.12345
echo truncate_number(99.123456,1); //result = 99.1
?>
m.m.j.kronenburg ¶
5 years ago
<?php
/**
* Returns and extracts the portion of string specified by the
* start and length parameters from the original string.
*
* This function is simulair to function substr() except that it
* removes the substring from the orignal string
* (passed by reference).
*
* @param string $string The input string.
* @param integer $start The start position (see substr() for
* explanation).
* @param integer $length The length (see substr()
* for explanation).
* @return mixed The substring or FALSE (see substr()
* for explanation).
**/
function substrex(&$string, $start, $length = PHP_INT_MAX)
{
if($start > strlen($string)) { return false; }
if(empty($length)) { return ''; }
if($start < 0) { $start = max(0, $start + strlen($string)); }
$end = ($length < 0) ?
strlen($string) + $length :
min(strlen($string), $start + $length);
if($end < $start) { return false; }
$length = $end - $start;
$substr = substr($string, $start, $length);
$string = substr($string, 0, $start).substr($string, $end);
return $substr;
}
?>
man13or at hotmail dot fr ¶
2 years ago
Shortcuts :
Getting the first character of a string
substr($string, 1)
Getting the last character of a string
substr($string, -1)
Remove the first character of a string
substr($string,1)
Remove the last character of a string
substr($string, 0, -1)
IT
PHP
编程语言
Linux
开发编程
科技
Elasticsearch
HTML/CSS/XML
网络
数据库
JAVA
面试
NoSQL
C/C++
Golang
Git
算法
操作系统
正则表达式
Redis
互联网
MySql
JavaScript
运维
软件
国际
架构设计
Mac OS
TCP/IP
Excel
Vim
Windows
Socket
Oracle
VR
MongoDB
Python
运营
MemCache
商业
硬件
电子
娱乐
设计
nginx
摄影
游戏
WordPress
HTTP
团建
数码电器
广告
广告
php7 安装fileinfo扩展
preg_split — 通过一个正则表达式分隔字符串
php位值,解决 PHP 中 usort 在值相同时改变原始位置的问题
[PHP] inet_pton/inet_ntop IP地址转换函数
[鸟哥]PHP_INT_MIN 和 -9223372036854775808
PHP 8.1
ADORecordSet对象
adodb手册
opcache预加载
Composer的Packagist资源
array_multisort() 多字段排序
PHPMailer设置utf8 PHPMailer字符集CharSet
mysql面试题
PHP json解析（json_decode）页面工具
php中几种注释规范
[原创]诡异的php-fpm超时问题
纯php实现DES以及TripleDES加密算法
PHP获取指定函数定义在哪个文件中及行号
PHP注释规范
php上周一、本周一、下周一日期