This a simple multi process application where you can choose
the maximun process that can run at the same time.
This is useful when you need to limit the fork of process.
When the MAXPROCESS is reached the program wait on pcntl_wait()
<?php
DEFINE(MAXPROCESS,25);
for ($i=0;$i<100;$i++){
$pid = pcntl_fork();
if ($pid == -1) {
die("could not fork");
} elseif ($pid) {
echo "I'm the Parent $i\n";
$execute++;
if ($execute>=MAXPROCESS){
pcntl_wait($status);
$execute--;
}
} else {
echo "I am the child, $i pid = $pid \n";
sleep(rand(1,3));
echo "Bye Bye from $i\n";
exit;
}
}
?>
PHP - Manual: pcntl_wait
2024-04-25
pcntl_wait
(PHP 5, PHP 7, PHP 8)
pcntl_wait — 等待或返回 fork 的子进程状态
说明
pcntl_wait(int
&$status, int $options = 0, array &$rusage = ?): intwait函数挂起当前进程的执行直到一个子进程退出或接收到一个信号要求中断当前进程或调用一个信号处理函数。如果一个子进程在调用此函数时已经退出（俗称僵尸进程），此函数立刻返回。子进程使用的所有系统资源将被释放。关于 wait 在您系统上工作的详细规范请查看您系统的 wait（2）手册。
注意:
这个函数等同于以
-1作为参数pid的值并且没有options参数来调用 pcntl_waitpid() 函数。
参数
-
status -
pcntl_wait() 将会存储状态信息到
status参数上，这个通过status参数返回的状态信息可以用以下函数 pcntl_wifexited(), pcntl_wifstopped(), pcntl_wifsignaled(), pcntl_wexitstatus(), pcntl_wtermsig() 以及 pcntl_wstopsig() 获取其具体的值。 -
options -
如果您的操作系统（多数BSD类系统）允许使用 wait3，您可以提供可选的
options参数。如果这个参数没有提供，wait将会被用作系统调用。如果wait3不可用，提供参数options不会有任何效果。options的值可以是0 或者以下两个常量或两个常量“或运算”结果（即两个常量代表意义都有效）。options可用值WNOHANG如果没有子进程退出立刻返回。 WUNTRACED子进程已经退出并且其状态未报告时返回。
返回值
pcntl_wait() 返回退出的子进程进程号，发生错误时返回 -1,如果提供了 WNOHANG 作为 option（wait3可用的系统）并且没有可用子进程时返回 0。
参见
- pcntl_fork() - 在当前进程当前位置产生分支（子进程）。译注：fork是创建了一个子进程，父进程和子进程 都从fork的位置开始向下继续执行，不同的是父进程执行过程中，得到的fork返回值为子进程 号，而子进程得到的是0。
- pcntl_signal() - 安装一个信号处理器
- pcntl_wifexited() - 检查状态代码是否代表一个正常的退出。
- pcntl_wifstopped() - 检查子进程当前是否已经停止
- pcntl_wifsignaled() - 检查子进程状态码是否代表由于某个信号而中断
- pcntl_wexitstatus() - 返回一个中断的子进程的返回代码
- pcntl_wtermsig() - 返回导致子进程中断的信号
- pcntl_wstopsig() - 返回导致子进程停止的信号
- pcntl_waitpid() - 等待或返回fork的子进程状态
add a note
User Contributed Notes 7 notes
federico at nextware dot it ¶
16 years ago
duerra at yahoo dot com ¶
11 years ago
Using pcntl_fork() can be a little tricky in some situations. For fast jobs, a child can finish processing before the parent process has executed some code related to the launching of the process. The parent can receive a signal before it's ready to handle the child process' status. To handle this scenario, I add an id to a "queue" of processes in the signal handler that need to be cleaned up if the parent process is not yet ready to handle them.
<?php
declare(ticks=1);
//A very basic job daemon that you can extend to your needs.
class JobDaemon{
public $maxProcesses = 25;
protected $jobsStarted = 0;
protected $currentJobs = array();
protected $signalQueue=array();
protected $parentPID;
public function __construct(){
echo "constructed \n";
$this->parentPID = getmypid();
pcntl_signal(SIGCHLD, array($this, "childSignalHandler"));
}
/**
* Run the Daemon
*/
public function run(){
echo "Running \n";
for($i=0; $i<10000; $i++){
$jobID = rand(0,10000000000000);
$launched = $this->launchJob($jobID);
}
//Wait for child processes to finish before exiting here
while(count($this->currentJobs)){
echo "Waiting for current jobs to finish... \n";
sleep(1);
}
}
/**
* Launch a job from the job queue
*/
protected function launchJob($jobID){
$pid = pcntl_fork();
if($pid == -1){
//Problem launching the job
error_log('Could not launch new job, exiting');
return false;
}
else if ($pid){
// Parent process
// Sometimes you can receive a signal to the childSignalHandler function before this code executes if
// the child script executes quickly enough!
//
$this->currentJobs[$pid] = $jobID;
// In the event that a signal for this pid was caught before we get here, it will be in our signalQueue array
// So let's go ahead and process it now as if we'd just received the signal
if(isset($this->signalQueue[$pid])){
echo "found $pid in the signal queue, processing it now \n";
$this->childSignalHandler(SIGCHLD, $pid, $this->signalQueue[$pid]);
unset($this->signalQueue[$pid]);
}
}
else{
//Forked child, do your deeds....
$exitStatus = 0; //Error code if you need to or whatever
echo "Doing something fun in pid ".getmypid()."\n";
exit($exitStatus);
}
return true;
}
public function childSignalHandler($signo, $pid=null, $status=null){
//If no pid is provided, that means we're getting the signal from the system. Let's figure out
//which child process ended
if(!$pid){
$pid = pcntl_waitpid(-1, $status, WNOHANG);
}
//Make sure we get all of the exited children
while($pid > 0){
if($pid && isset($this->currentJobs[$pid])){
$exitCode = pcntl_wexitstatus($status);
if($exitCode != 0){
echo "$pid exited with status ".$exitCode."\n";
}
unset($this->currentJobs[$pid]);
}
else if($pid){
//Oh no, our job has finished before this parent process could even note that it had been launched!
//Let's make note of it and handle it when the parent process is ready for it
echo "..... Adding $pid to the signal queue ..... \n";
$this->signalQueue[$pid] = $status;
}
$pid = pcntl_waitpid(-1, $status, WNOHANG);
}
return true;
}
}
digitalaudiorock at gmail dot com ¶
12 years ago
I was unable to get pcntl_wait or pcntl_waitpid to terminate when I had an active signal handler. I then noticed the post below from gaylord at 100days dot de, however I'm a little confused by that post as I found the exact opposite to be true. The default value of the third parameter of pcntl_signal (the restart_syscalls parameter) is true and this seems to cause the wait to continue when the signal arrives. In order to prevent this I had to expressly set it to false. That is:
pcntl_signal(SIGTERM, 'my_handler_function', false);
gaylord at 100days dot de ¶
12 years ago
pcntl_wait will not terminate on signals if you have a PHP signal handler activated (pcntl_signal).
This is unless the signal handler was activated with 3rd parameter=true.
Example:
<?php
declare(ticks=1);
pcntl_signal(SIGTERM, "myHandler");
$pid=pcntl_wait($status);
?>
This will not terminate on SIGTERM sent to the process, because "wait" will be restarted after php recieves the signal. The signal handler "myHandler" will not be called unless pcntl_wait terminates for some other reason.
Change to:
<?php
declare(ticks=1);
pcntl_signal(SIGTERM, "myHandler", true);
$pid=pcntl_wait($status);
?>
Now the pcntl_wait terminates when a signal comes in and "myHandler" will be called on SIGTERM. (Make sure to put the wait in a loop though, because it will now not only terminate when a child exits but also when a signal arrives. Test for $pid>0 to detect a exit message from a child)
(thanks to Andrey for helping me debugging this)
duerra at yahoo dot com ¶
11 years ago
Oops, I stripped just a little much from the job daemon code in the previous comment. You'll want to add a little line before the ->launchJob() method is called:
<?php
while(count($this->currentJobs) >= $this->maxProcesses){
echo "Maximum children allowed, waiting...\n";
sleep(1);
}
thisisroot at gmail dot com ¶
16 years ago
Below is a simple example of forking some children and timing the total duration (useful for stress tests).
<?php
$isParent = true;
$children = array();
$start = microtime( true);
/* Fork you!
* (Sorry, I had to)
*/
$ceiling = $CONCURRENCY - 1;
for ( $i = 0; (( $i < $ceiling) && ( $isParent)); $i++) {
$pid = pcntl_fork();
if ( $pid === 0) {
$isParent = false;
} elseif ( $pid != -1) {
$children[] = $pid;
}
}
/* Process body */
echo "Do stuff here\n";
/* Cleanup */
if ( $isParent) {
$status = null;
while ( count( $children)) {
pcntl_wait( $status);
array_pop( $children);
}
echo "Completed in " . ( microtime( true) - $start) . " seconds.\n";
}
?>
thomas dot nicolai at unisg dot ch ¶
16 years ago
The code before isnt working for me cause the children are correctly started but not refreshed after they died. So keep in mind to use this instead and use the signal handler to know when a child exits to know when you have to start a new one. I added a few lines to the posting from {andy at cbeyond dot net} cause his post wasnt working for me as well (PHP5.1). Same effect like the one below.
<?php
declare(ticks = 1);
$max=5;
$child=0;
// function for signal handler
function sig_handler($signo) {
global $child;
switch ($signo) {
case SIGCHLD:
echo "SIGCHLD received\n";
$child--;
}
}
// install signal handler for dead kids
pcntl_signal(SIGCHLD, "sig_handler");
while (1){
$child++;
$pid=pcntl_fork();
if ($pid == -1) {
die("could not fork");
} else if ($pid) {
// we are the parent
if ( $child >= $max ){
pcntl_wait($status);
$child++;
}
} else {
// we are the child
echo "\t Starting new child | now we de have $child child processes\n";
// presumably doing something interesting
sleep(rand(3,5));
exit;
}
}
?>
IT
PHP
编程语言
Linux
科技
开发编程
Elasticsearch
HTML/CSS/XML
网络
JAVA
NoSQL
C/C++
面试
Golang
数据库
Git
算法
正则表达式
操作系统
Redis
互联网
MySql
JavaScript
运维
软件
架构设计
Mac OS
TCP/IP
国际
Excel
Vim
Windows
Socket
Oracle
VR
MongoDB
运营
Python
MemCache
商业
硬件
电子
设计
nginx
娱乐
摄影
游戏
WordPress
HTTP
团建
数码电器
广告
广告
php7 安装fileinfo扩展
preg_split — 通过一个正则表达式分隔字符串
[PHP] inet_pton/inet_ntop IP地址转换函数
php位值,解决 PHP 中 usort 在值相同时改变原始位置的问题
PHPMailer设置utf8 PHPMailer字符集CharSet
如何在Composer中为GitLab实例设置访问令牌
array_multisort() 多字段排序
laravel框架查看sql语句方式
[原创]诡异的php-fpm超时问题
PHP获取指定函数定义在哪个文件中及行号
利用php soap实现web service
php设置cookie为httponly防止xss攻击
PHP5 扩展SOAP 调用 webservice
PHP-FPM进程数的设定
PHP7添加redis扩展
利用PHP SOAP实现WEB SERVICE
纯php实现DES以及TripleDES加密算法
PHPstorm 里面Terminal 不能使用 esc键吗退出编辑模式吗
Composer的Packagist资源
php扩展开发