In the previous note by -> lukeross at sys3175 dot co dot uk <- there is a coding error in the for() loops. After correcting the error, I found that this function did a great job of converting color images to 2 colors.
The following is the corrected function code:
function ImageColorFloydSteinberg($dst_img, $src_img) {
ImageColorAllocate($dst_img, 0,0,0);
ImageColorAllocate($dst_img, 255,255,255);
$isx = ImageSX($src_img);
$isy = ImageSY($src_img);
$grey_img = ImageCreate($isx, $isy);
for ($a = 0; $a <= 255; $a++) ImageColorAllocate($grey_img, $a,$a,$a);
$isx -= 1; // To correct pixel count in source image width starting from 0
$isy -= 1; // Correcting pixel count in source image height starting from 0
for($x = 0; $x <= $isx; $x++) {
for($y = 0; $y <= $isy; $y++) {
$color = ImageColorsForIndex($src_img, ImageColorAt($src_img, $x, $y));
$greyscale = .299 * $color["red"] + .587 * $color["green"] + .114 * $color["blue"];
ImageSetPixel($grey_img, $x, $y, ImageColorClosest($grey_img, $greyscale, $greyscale, $greyscale));
}
}
for($x = 0; $x <= $isx; $x++) {
for($y = 0; $y <= $isy; $y++) {
$color = ImageColorsForIndex($grey_img, ImageColorAt($grey_img, $x, $y));
if ($color["red"] > 128) {
ImageSetPixel($dst_img, $x, $y, ImageColorClosest($dst_img,255,255,255));
$err = $color["red"] - 255;
} else {
ImageSetPixel($dst_img, $x, $y, ImageColorClosest($dst_img,0,0,0));
$err = $color["red"];
}
if ($x != $isx) {
$color2 = ImageColorsForIndex($grey_img, ImageColorAt($grey_img, $x+1, $y));
$newgrey = $color2["red"] + $err * 7 / 16;
ImageSetPixel($grey_img, $x+1, $y, ImageColorClosest($grey_img,$newgrey, $newgrey, $newgrey));
}
if ($x != 0) {
$color2 = ImageColorsForIndex($grey_img, ImageColorAt($grey_img, $x-1, $y));
$newgrey = $color2["red"] + $err * 3 / 16;
ImageSetPixel($grey_img, $x-1, $y, ImageColorClosest($grey_img,$newgrey, $newgrey, $newgrey));
}
if ($y != $isy) {
$color2 = ImageColorsForIndex($grey_img, ImageColorAt($grey_img, $x, $y+1));
$newgrey = $color2["red"] + $err * 5 / 16;
ImageSetPixel($grey_img, $x, $y+1, ImageColorClosest($grey_img,$newgrey, $newgrey, $newgrey));
}
if ($x != $isx && $y != $isy) {
$color2 = ImageColorsForIndex($grey_img, ImageColorAt($grey_img, $x+1, $y+1));
$newgrey = $color2["red"] + $err / 16;
ImageSetPixel($grey_img, $x+1, $y+1, ImageColorClosest($grey_img,$newgrey, $newgrey, $newgrey));
}
}
}
imagedestroy($grey_img);
}
PHP - Manual: imagewbmp
2024-11-15
imagewbmp
(PHP 4 >= 4.0.1, PHP 5, PHP 7, PHP 8)
imagewbmp — 以 WBMP 格式将图像输出到浏览器或文件
说明
imagewbmp(resource
$image, string $filename = ?, int $foreground = ?): bool
imagewbmp() 从
image 图像创建一个名为 filename 的
WBMP 文件。image
参数是 imagecreatetruecolor() 的返回值。
filename 参数是可选项，如果省略，则直接将原图像流输出。通过用
header() 发送 image/vnd.wap.wbmp
的 Content-type，可以创建直接输出 WBMP 图像的 PHP 脚本。
注意:
WBMP 支持仅能用于 PHP 编译时加入了 GD-1.8 或更高版本时。
用可选的 foreground 参数可以设定前景色，用
imagecolorallocate() 函数返回的颜色标识符。默认前景色是黑色。
参见 image2wbmp()，imagepng()，imagegif()，imagejpeg() 和 imagetypes()。
add a note
User Contributed Notes 2 notes
andre at bynetworld dot com ¶
14 years ago
lukeross at sys3175 dot co dot uk ¶
20 years ago
As has been commented before, GD doesnt do a very good translation to 2-colours, especially for photos. The following routine converts to two colours, I believe using error diffusion (the algorithm's nicked off news). It's slow, but just about adequate for small images and low load. I suspect it can be made much more efficient :-)
function ImageColorFloydSteinberg($dst_img, $src_img) {
ImageColorAllocate($dst_img, 0,0,0);
ImageColorAllocate($dst_img, 255,255,255);
$grey_img = ImageCreate(ImageSX($src_img), ImageSY($src_img));
for ($a = 0; $a <= 255; $a++) ImageColorAllocate($grey_img, $a,$a,$a);
for($x = 0; $x <= ImageSX($src_img); $x++) {
for($y = 0; $y <= ImageSY($src_img); $y++) {
$color = ImageColorsForIndex($src_img, ImageColorAt($src_img, $x, $y));
$greyscale = .299 * $color["red"] + .587 * $color["green"] + .114 * $color["blue"];
ImageSetPixel($grey_img, $x, $y, ImageColorClosest($grey_img, $greyscale, $greyscale, $greyscale));
}
}
for($x = 0; $x <= ImageSX($src_img); $x++) {
for($y = 0; $y <= ImageSY($src_img); $y++) {
$color = ImageColorsForIndex($grey_img, ImageColorAt($grey_img, $x, $y));
if ($color["red"] > 128) {
ImageSetPixel($dst_img, $x, $y, ImageColorClosest($dst_img,255,255,255));
$err = $color["red"] - 255;
} else {
ImageSetPixel($dst_img, $x, $y, ImageColorClosest($dst_img,0,0,0));
$err = $color["red"];
}
if ($x != ImageSx($src_img)) {
$color2 = ImageColorsForIndex($grey_img, ImageColorAt($grey_img, $x+1, $y));
$newgrey = $color2["red"] + $err * 7 / 16;
ImageSetPixel($grey_img, $x+1, $y, ImageColorClosest($grey_img,$newgrey, $newgrey, $newgrey));
}
if ($x != 0) {
$color2 = ImageColorsForIndex($grey_img, ImageColorAt($grey_img, $x-1, $y));
$newgrey = $color2["red"] + $err * 3 / 16;
ImageSetPixel($grey_img, $x-1, $y, ImageColorClosest($grey_img,$newgrey, $newgrey, $newgrey));
}
if ($y != ImageSy($src_img)) {
$color2 = ImageColorsForIndex($grey_img, ImageColorAt($grey_img, $x, $y+1));
$newgrey = $color2["red"] + $err * 5 / 16;
ImageSetPixel($grey_img, $x, $y+1, ImageColorClosest($grey_img,$newgrey, $newgrey, $newgrey));
}
if ($x != ImageSx($src_img) && $y != ImageSy($src_img)) {
$color2 = ImageColorsForIndex($grey_img, ImageColorAt($grey_img, $x+1, $y+1));
$newgrey = $color2["red"] + $err / 16;
ImageSetPixel($grey_img, $x+1, $y+1, ImageColorClosest($grey_img,$newgrey, $newgrey, $newgrey));
}
}
}
imagedestroy($grey_img);
}
To output your WBMP, use
ImageWBMP($final_img, "", ImageColorClosest(255,255,255));
IT
PHP
编程语言
Linux
开发编程
科技
Elasticsearch
HTML/CSS/XML
网络
JAVA
NoSQL
数据库
面试
C/C++
Golang
Git
算法
操作系统
正则表达式
Redis
互联网
MySql
JavaScript
运维
软件
国际
架构设计
Mac OS
TCP/IP
Excel
Vim
Windows
Socket
Oracle
VR
MongoDB
Python
运营
MemCache
商业
硬件
电子
娱乐
设计
nginx
摄影
游戏
WordPress
HTTP
团建
数码电器
广告
--
php7 安装fileinfo扩展
preg_split — 通过一个正则表达式分隔字符串
php位值,解决 PHP 中 usort 在值相同时改变原始位置的问题
[PHP] inet_pton/inet_ntop IP地址转换函数
array_multisort() 多字段排序
PHPMailer设置utf8 PHPMailer字符集CharSet
ADORecordSet对象
adodb手册
PHP 8.1
[鸟哥]PHP_INT_MIN 和 -9223372036854775808
opcache预加载
Composer的Packagist资源
mysql面试题
[鸟哥]PHP FFI详解 - 一种全新的PHP扩展方式
PHP7添加redis扩展
adodb连接mysql多个数据库的问题
PHP获取指定函数定义在哪个文件中及行号
PHP mkdir()写出来的权限与mode值不符合
PHP-FPM进程数的设定
利用PHP SOAP实现WEB SERVICE