PHP - Manual: 递增／递减运算符

2024-11-15

递增／递减运算符

PHP 支持 C 风格的前／后递增与递减运算符。

注意: 递增／递减运算符不影响布尔值。递减 null 值也没有效果，但是递增 null 的结果是 1。

**递增／递减运算符**
例子	名称	效果
++$a	前加	`$a` 的值加一，然后返回 `$a`。
$a++	后加	返回 `$a`，然后将 `$a` 的值加一。
--$a	前减	`$a` 的值减一，然后返回 `$a`。
$a--	后减	返回 `$a`，然后将 `$a` 的值减一。

一个简单的示例脚本：


<?php
echo "<h3>Postincrement</h3>";
$a = 5;
echo "Should be 5: " . $a++ . "<br />\n";
echo "Should be 6: " . $a . "<br />\n";

echo "<h3>Preincrement</h3>";
$a = 5;
echo "Should be 6: " . ++$a . "<br />\n";
echo "Should be 6: " . $a . "<br />\n";

echo "<h3>Postdecrement</h3>";
$a = 5;
echo "Should be 5: " . $a-- . "<br />\n";
echo "Should be 4: " . $a . "<br />\n";

echo "<h3>Predecrement</h3>";
$a = 5;
echo "Should be 4: " . --$a . "<br />\n";
echo "Should be 4: " . $a . "<br />\n";
?>

在处理字符变量的算数运算时，PHP 沿袭了 Perl 的习惯，而非 C 的。例如，在 Perl 中 $a = 'Z'; $a++; 将把 $a 变成'AA'，而在 C 中，a = 'Z'; a++; 将把 a 变成 '['（'Z' 的 ASCII 值是 90，'[' 的 ASCII 值是 91）。注意字符变量只能递增，不能递减，并且只支持纯字母（a-z 和 A-Z）。递增／递减其他字符变量则无效，原字符串没有变化。

示例 #1 涉及字符变量的算数运算


<?php
echo '== Alphabets ==' . PHP_EOL;
$s = 'W';
for ($n=0; $n<6; $n++) {
    echo ++$s . PHP_EOL;
}
// 数字字符的不同行为
echo '== Digits ==' . PHP_EOL;
$d = 'A8';
for ($n=0; $n<6; $n++) {
    echo ++$d . PHP_EOL;
}
$d = 'A08';
for ($n=0; $n<6; $n++) {
    echo ++$d . PHP_EOL;
}
?>

以上例程会输出：

== Characters ==
X
Y
Z
AA
AB
AC
== Digits ==
A9
B0
B1
B2
B3
B4
A09
A10
A11
A12
A13
A14

递增或递减布尔值没有效果。

add a note

User Contributed Notes 10 notes

down

hartmut at php dot net ¶

9 years ago


Note that 

$a="9D9"; var_dump(++$a);   => string(3) "9E0"

but counting onwards from there 

$a="9E0"; var_dump(++$a);   => float(10)

this is due to "9E0" being interpreted as a string representation of the float constant 9E0 (or 9e0), and thus evalutes to 9 * 10^0 = 9 (in a float context)

down

ayyappan dot ashok at gmail dot com ¶

6 years ago


Rule for Increment and decrement:

At some moment we could be confused with increment and decrement in various cases. To avoid such cases, let us follow certain logical rule behind to get successful results with out mess.

<?php
           $n = 3;
           echo $n-- + --$n; 
           echo "<br/>";
           echo $n;
?>

1. Postfix form of ++,-- operator follows the rule  [ use-then-change ],

2. Prefix form (++x,--x) follows the rule [ change-then-use ].

Solution based on the rule:

Step 1:  
use then change   $n--  use is 3 and change is 2

Step 2.  
change then use   --$n  change is 2 and use is 1

Step 3.
use + use = (3 + 1) = 4

Courtesy : stackoverflow : Sunil Dhillon : 4686665

down

aluciffer at hotmail dot com ¶

7 years ago


Regarding character incrementing and PHP following Perl's convention with character operations.
Actually i found that there is a difference, and incrementing and decrementing unfortunately does not yield the reverse, expected results.
For example, the following piece of code:
<?php
echo '== Alphabets ==' . PHP_EOL;
$s = 'W';
for ($n=0; $n<10; $n++) {
    echo ++$s . ' ';
}
echo PHP_EOL;

for ($n=10; $n>0; $n--) {
    echo (--$s) . ' ';
}
?>
Will output:
== Alphabets ==
X Y Z AA AB AC AD AE AF AG 
AG AG AG AG AG AG AG AG AG AG 

Please note that the decrement operator has no effect on the character or string.

On the other hand, in Perl, the similar script:

#!/usr/bin/perl

my $s = 'W';

foreach (1 .. 10) {
print  ++$s . " ";
}  

print "\n";

foreach (1 .. 10) {
print --$s . " ";
}

Will output:

X Y Z AA AB AC AD AE AF AG 
-1 -2 -3 -4 -5 -6 -7 -8 -9 -10

down

cleong at letstalk dot com ¶

20 years ago


Note that the ++ and -- don't convert a boolean to an int. The following code will loop forever.


function a($start_index) {

for($i = $start_index; $i < 10; $i++) echo "\$i = $i\n";

}


a(false);


This behavior is, of course, very different from that in C. Had me pulling out my hair for a while.

down

-1

dsbeam at gmail dot com ¶

12 years ago


When using the ++ operator by itself on a variable, ++$var is faster than $var++ and uses slightly less memory (in my experiments).  It would seem like this could be optimized in the language during runtime (if $var++ is the only thing in the whole statement, it could be treated as ++$var).

I conducted many tests (I believe to be fair), and here's one of the results:

$i++ took 8.47515535355 seconds and 2360 bytes
++$i took 7.80081486702 seconds and 2160 bytes

Here's my code.  If anyone sees a bias in it, tell me.  I conducted it many times, each time going through a loop one million iterations and doing each test 10 - 15 times (10 - 15 million uses of the ++ operator).

<?php

ini_set( 'MAX_EXEC_TIME', 120 );
ob_start( );

$num_tests = 10;
$startFirst = $startSecond = $endFirst = $endSecond = $startFirstMemory = $endFirstMemory = $startSecondMemory = $endSecondMemory = $someVal = 0;
$times = array( '$i++' => array( 'time' => 0, 'memory' => 0 ), '++$i' => array( 'total' => 0, 'memory' => 0 ) );

for( $j = 0; $j < $num_tests; ++$j )
{
        for( $i = 0, $startFirstMemory = memory_get_usage( ), $startFirst = microtime( true ); $i < 10000000; $i++ ){ $someval = 2; }
        $endFirstMemory = memory_get_usage( );
        $endFirst = microtime( true );

        for( $i = 0, $startSecondMemory = memory_get_usage( ), $startSecond = microtime( true ); $i < 10000000; ++$i ){ $someval = 2; }
        $endSecondMemory = memory_get_usage( );
        $endSecond = microtime( true );

        $times[ '$i++' ][ $j ] = array( 'startTime' => $startFirst, 'endTime' => $endFirst, 'startMemory' => $startFirstMemory, 'endMemory' => $endFirstMemory );
        $times[ '++$i' ][ $j ] = array( 'startTime' => $startSecond, 'endTime' => $endSecond, 'startMemory' => $startSecondMemory, 'endMemory' => $endSecondMemory );
}

for( $i = 0; $i < $num_tests; ++$i )
{
        $times[ '$i++' ][ 'time' ] += ( $times[ '$i++' ][ $i ][ 'endTime' ] - $times[ '$i++' ][ $i ][ 'startTime' ] );
        $times[ '++$i' ][ 'time' ] += ( $times[ '++$i' ][ $i ][ 'endTime' ] - $times[ '++$i' ][ $i ][ 'startTime' ] );
        $times[ '$i++' ][ 'memory' ] += ( $times[ '$i++' ][ $i ][ 'endMemory' ] - $times[ '$i++' ][ $i ][ 'startMemory' ] );
        $times[ '++$i' ][ 'memory' ] += ( $times[ '++$i' ][ $i ][ 'endMemory' ] - $times[ '++$i' ][ $i ][ 'startMemory' ] );
}

echo 'There were ' . $num_tests . ' tests conducted, here\'s the totals<br /><br />
$i++ took ' . $times[ '$i++' ][ 'time' ] . ' seconds and ' . $times[ '$i++' ][ 'memory' ] . ' bytes<br />
++$i took ' . $times[ '++$i' ][ 'time' ] . ' seconds and ' . $times[ '++$i' ][ 'memory' ] . ' bytes';

ob_end_flush( );

?>

Try it yourself, ;)

down

-3

ayyappan dot ashok at gmail dot com ¶

6 years ago


Rule Incrementing or decrementing booleans has no effect.

It has an effort on Incrementing or decrementing booleans.

Please look over the code.

$var = true;
echo ++$var;   //Results 1

Similarly 

$var = true;
echo ++$var;   //Results 1

$var = (int)false;
echo ++$var;   //Results 1

$var = (int)false;
echo $var++;   //Results 0;    

Note : Tested on PHP Version 5.5.32

down

-3

leo zandvliet ¶

3 years ago


Please note the difference between post-incrementing in a for-loop and recursive function calls (don't use it in the latter!).

<?php
$increment = $preIncrement = $postIncrement = 1;
echo $increment.' - '.$preIncrement.' - '.$postIncrement;
echo '<br>';
echo ($increment+1).' - '.(++$preIncrement).' - '.($postIncrement++);
echo '<br>';
echo ($increment+1).' - '.(++$preIncrement).' - '.($postIncrement++);
echo '<br>';
echo ($increment+1).' - '.(++$preIncrement).' - '.($postIncrement++);
?>

Outputs:
1 - 1 - 1
2 - 2 - 1
2 - 3 - 2
2 - 4 - 3

The for-loop:
<?php
for($i=0; $i<4; $i++)
{
    echo $i.'<br>';
}
?>

Outputs:
0
1
2
3

And the 'headache' mistake, post-increment as parameter of a recursive call:
<?php
testFunctionNesting(3, 1, 1, 1);

function testFunctionNesting($max, $increment, $preIncrement, $postIncrement)
{    
    echo $increment.' - '.$preIncrement.' - '.$postIncrement;
    echo '<br>';
    
    if($increment>=$max)
    {
        $inc = $increment;
        $pre = $preIncrement;
        $post = $postIncrement;
        return;
    }
        
    
    testFunctionNesting($max, ($increment+1), (++$preIncrement), ($postIncrement++));
}
?>

Output shows that the postIncremented value is never really available as incremented value:
1 - 1 - 1
2 - 2 - 1
3 - 3 - 1

down

-9

Brad Proctor ¶

11 years ago


I ran some tests (on PHP 5.3.3) of my own and was surprised to find $i += 1 to be the fastest method of incrementing.  Here are the methods fastest to slowest:

$i += 1;
++$i;
$i++;
$i = $i + 1;

down

-15

sneskid at hotmail dot com ¶

12 years ago


(related to what "Are Pedersen" wrote)
With arrays it can lead to much confusion if your index variable is altered on the right side of the = sign, either with ++|-- or even when passed to a function by reference..
Consider these (PHP 5):
<?php
$A[$a] = ++$a; // [1]=1
$B[++$b] = ++$b; // [1]=2
$C[$c+=0] = ++$c; // [0]=1
?>
In 'A' you have to be aware that PHP evaluates $A[$a] last.
Yet in 'B' and 'C' PHP evaluates the index and saves it in a temporary variable.

You can always force PHP to evaluate a variable without explicitly storing it as a named variable first, with a simple "+=0" like in example 'C'.

Compared to 'A', 'C' gives the more logically expected result, when we expect evaluation occurs left to right.
PHP does evaluate left to right BUT it will attempt to cut down on temporary variables, which can lead to confusing results.

So just be aware and use either behavior to your advantage for the desired functionality.

down

-19

fred at surleau dot com ¶

20 years ago


Other samples :

$l="A";      $l++; -> $l="B"

$l="A0";     $l++; -> $l="A1"

$l="A9";     $l++; -> $l="B0"

$l="Z99";    $l++; -> $l="AA00"

$l="5Z9";    $l++; -> $l="6A0"

$l="9Z9";    $l++; -> $l="10A0"

$l="9z9";    $l++; -> $l="10a0"

$l="J85410"; $l++; -> $l="J85411"

$l="J99999"; $l++; -> $l="K00000"

$l="K00000"; $l++; -> $l="K00001"

add a note

官方地址：https://www.php.net/manual/en/language.operators.increment.php

有任何技术问题请点击这里网站运营推广招聘

IT PHP 编程语言 Linux 开发编程科技 Elasticsearch HTML/CSS/XML 网络 JAVA NoSQL 数据库面试 C/C++ Golang Git 算法操作系统正则表达式 Redis 互联网 MySql JavaScript 运维软件国际架构设计 Mac OS TCP/IP Excel Vim Windows Socket Oracle VR MongoDB Python 运营 MemCache 商业硬件电子娱乐设计 nginx 摄影游戏 WordPress HTTP 团建数码电器

php7 安装fileinfo扩展 preg_split — 通过一个正则表达式分隔字符串 php位值,解决 PHP 中 usort 在值相同时改变原始位置的问题 [PHP] inet_pton/inet_ntop IP地址转换函数 array_multisort() 多字段排序 PHPMailer设置utf8 PHPMailer字符集CharSet ADORecordSet对象 adodb手册 PHP 8.1 [鸟哥]PHP_INT_MIN 和 -9223372036854775808 opcache预加载 Composer的Packagist资源 mysql面试题 [鸟哥]PHP FFI详解 - 一种全新的PHP扩展方式 PHP7添加redis扩展 PHP mkdir()写出来的权限与mode值不符合 Packagist / Composer 中国全量镜像 PHP获取指定函数定义在哪个文件中及行号 adodb连接mysql多个数据库的问题 PHPstorm 里面Terminal 不能使用 esc键吗退出编辑模式吗

略微加速

PHP官方手册 - 互联网笔记

递增／递减运算符

User Contributed Notes 10 notes